BLP5LA55SG

All information provided in this document is subject to legal disclaimers.

© Ampleon Netherlands B.V. 2023. All rights reserved.

Product data sheet

Rev. 1 — 7 April 2023

18 of 20

BLP5LA55SG

Power LDMOS transistor

12. Legal information

12.1

Data sheet status

[1]

Please consult the most recently issued document before initiating or completing a design.

[2]

The term ‘short data sheet’ is explained in section “Definitions”.

[3]

The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.ampleon.com.

12.2

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Ampleon does not give any representations or

warranties as to the accuracy or completeness of information included herein

and shall have no liability for the consequences of use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Ampleon sales office. In

case of any inconsistency or conflict with the short data sheet, the full data

sheet shall prevail.

Product specification — The information and data provided in a Product

data sheet shall define the specification of the product as agreed between

Ampleon and its customer, unless Ampleon and customer have explicitly

agreed otherwise in writing. An agreement according to which the functions

and qualities of Ampleon products exceed those described in the Product

data sheet is invalid.

12.3

Disclaimers

Maturity — After the relevant product(s) have passed the Release Gate in

Ampleon's release process, Ampleon will confirm the final version in writing.

Limited warranty and liability — Ampleon uses its best efforts to keep the

information in this document accurate and reliable. However, Ampleon gives

no representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and assumes no liability for the

consequences of the use of such information. Ampleon is not liable for

content provided by an external information source.

In no event and irrespective of the legal basis (contract, tort (including

negligence) statutory liability, misrepresentation, indemnity or any other area

of law) shall Ampleon be liable for any indirect, incidental, punitive, special or

consequential damages (including but without limitation loss of profit or

revenue, loss of use or loss of production, loss of data, cost of capital, cost of

substitute goods, property damage external to the Ampleon products and any

damage, expenditure or loss arising out of such damage, business

interruption, costs related to the removal or replacement of any products or

rework charges) or any of the foregoing suffered by any third party.

Notwithstanding any damages that customer might incur for any reason

whatsoever, Ampleon’s aggregate and cumulative liability towards customer

for the products described herein shall be limited in accordance with the

Terms and conditions of commercial sale of Ampleon.

Right to make changes — Ampleon reserves the right to change

information including but without limitation specifications and product

descriptions published in this document at any time and without notice. This

document supersedes and replaces all information regarding these products

supplied prior to the publication hereof.

Suitability for use — Ampleon products are not designed, authorized or

warranted to be suitable for use in life support, life-critical or safety-critical

systems or equipment, nor in applications where failure or malfunction of an

Ampleon product can reasonably be expected to result in personal injury,

death or severe property or environmental damage. Insofar as a customer or

another party nevertheless uses Ampleon products unlawfully for such

purposes, Ampleon and its suppliers are not liable for any damages.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Ampleon makes no representation

or warranty that such applications will be suitable for the specified use without

further testing or modification.

Customers are responsible for the design and operation of their applications

and products using Ampleon products, and Ampleon is not liable for any

assistance with applications or customer product design. It is customer’s sole

responsibility to determine whether the Ampleon product is suitable and fit for

the customer’s applications and products planned, as well as for the planned

application and use of customer’s third party customer(s). Customers shall

provide appropriate design and operating safeguards to minimize the risks

associated with their applications and products.

Ampleon is not liable related to any default, damage, costs or problem which

is based on any weakness or default in the customer’s applications or

products, or the application or use by customer’s third party customer(s).

Customer is responsible for and shall do all necessary testing for the

customer’s applications and products using Ampleon products in order to

avoid a default of the applications and the products or of the application or

use by customer’s third party customer(s). Ampleon is not liable in this

respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not guaranteed. Constant or

repeated exposure to limiting values will permanently and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — Ampleon products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.ampleon.com/terms, unless otherwise agreed in a valid written

individual agreement. In the event of signing an individual agreement the

terms and conditions of the respective agreement shall apply. Ampleon

hereby expressly objects to and rejects the validity of customer's terms and

conditions regarding the purchase of Ampleon products by customer.

Document status[1][2]

Product status[3]

Definition

Objective [short] data sheet

Development

This document contains data from the objective specification for product development.

Preliminary [short] data sheet

Qualification

This document contains data from the preliminary specification.

Product [short] data sheet

Production

This document contains the product specification.