AD9992BBCZ datasheet(19/92 Pages) AD

19 / 92 page

AD9992

Rev. C | Page 19 of 92

HORIZONTAL CLAMPING AND BLANKING

The horizontal clamping and blanking pulses of the AD9992

are fully programmable to suit a variety of applications.

Individual control is provided for CLPOB, PBLK, and HBLK in

the different regions of each field. This allows the dark pixel

clamping and blanking patterns to be changed at each stage of

the readout to accommodate different image transfer timing

and high speed line shifts.

Individual CLPOB and PBLK Patterns

The AFE horizontal timing consists of CLPOB and PBLK, as

shown in Figure 22. These two signals are programmed

independently using the registers listed in Table 10. The start

polarity for the CLPOB (and PBLK) signal is CLPOBPOL

(PBLKPOL), and the first and second toggle positions of the pulse

are CLPOBTOG1 (PBLKTOG1) and CLPOBTOG2 (PBLKTOG2).

Both signals are active low and should be programmed

accordingly.

A separate pattern for CLPOB and PBLK can be programmed

for each vertical sequence. As described in the Vertical Timing

Generation section, several V-sequences can be created, each

containing a unique pulse pattern for CLPOB and PBLK. Figure 48

shows how the sequence change positions divide the readout field

into different regions. By assigning a different V-sequence to

each region, the CLPOB and PBLK signals can change with

each change in the vertical timing.

CLPOB and PBLK Masking Areas

Additionally, the AD9992 allows the CLPOB and PBLK signals to

be disabled in certain lines in the field without changing any of

the existing CLPOB pattern settings.

To use CLPOB (or PBLK) masking, the CLPMASKSTART

(PBLKMASKSTART) and CLPMASKEND (PBLKMASKEND)

registers are programmed to specify the start and end lines in

the field where the CLPOB (PBLK) patterns are ignored. The three

sets of start and end registers allow up to three CLPOB (PBLK)

masking areas to be created.

The CLPOB and PBLK masking registers are not specific to

a certain V-sequence; they are always active for any existing field of

timing. During operation, to disable the CLPOB masking

feature, these registers must be set to the maximum value of

0x1FFF or a value greater than the programmed VD length.

Note that to disable CLPOB (and PBLK) masking during power-up,

it is recommended to set CLPMASKSTART (PBLKMASKSTART)

to 8191 and CLPMASKEND (PBLKMASKEND) to 0. This

prevents any accidental masking caused by register update events.

Table 10. CLPOB and PBLK Pattern Registers

Length

Range

Description

CLPOBPOL

High/low

Starting polarity of CLPOB for each V-sequence.

PBLKPOL

High/low

Starting polarity of PBLK for each V-sequence.

CLPOBTOG1

13b

0 to 8191 pixel locations

First CLPOB toggle position within line for each V-sequence.

CLPOBTOG2

13b

0 to 8191 pixel locations

Second CLPOB toggle position within line for each V-sequence.

PBLKTOG1

13b

0 to 8191 pixel locations

First PBLK toggle position within line for each V-sequence.

PBLKTOG2

13b

0 to 8191 pixel locations

Second PBLK toggle position within line for each V-sequence.

CLPMASKSTART

13b

0 to 8191 line locations

CLPOB masking area—starting line within field (maximum of three areas).

CLPMASKEND

13b

0 to 8191 line locations

CLPOB masking area—ending line within field (maximum of three areas).

PBLKMASKSTART

13b

0 to 8191 line locations

PBLK masking area—starting line within field (maximum of three areas).

PBLKMASKEND

13b

0 to 8191 line locations

PBLK masking area—ending line within field (maximum of three areas).

AD9992BBCZ 数据表(PDF) 19 Page - Analog Devices

AD9992BBCZ 数据表(HTML) 19 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

数据表下载

链接网址

AD9992BBCZ 数据表(PDF) 19 Page - Analog Devices

AD9992BBCZ 数据表(HTML) 19 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

数据表 下载

链接网址

数据表下载