PCMFxUSB3BA/C series

Common-mode EMI filter for differential channels with

integrated bidirectional ESD protection

Rev. 4 — 12 May 2020

Product data sheet

1. General description

Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic

Discharge (ESD) protection for one, two and three differential channels. The devices are designed

to provide low insertion loss for differential high-speed signals on each channel while unwanted

common-mode signals are attenuated.

Each differential channel incorporates two signal lines that are coupled by integrated coils. Diodes

provide protection to downstream components from ESD voltages up to ±15 kV on each signal line.

Table 1. Product overview

Type number

Number of channels Package Name

PCMF1USB3BA/C

1

WLCSP5

PCMF2USB3BA/C

2

WLCSP10

PCMF3USB3BA/C

3

WLCSP15

2. Features and benefits

• One, two and three differential channels common-mode EMI filters with integrated ESD

protection

• ESD protection up to ±15 kV contact discharge according to IEC 61000-4-2

• Superior common-mode suppression over a wide frequency range

• Superior RF performance compared to other integrated filters or discrete filters with external

ESD protection

• Extremely high symmetry between line pairs

• Industry-standard Wafer-Level Chip-Scale Packages: WLCSP5, 10 and 15 for smaller footprint

3. Applications

• Smartphone, cellular and cordless phone

• USB3.2, USB2.0, HDMI2.1, HDMI2.0, HDMI1.4

• General-purpose downstream ESD protection for differential data lines

• Tablet PC and Mobile Internet Device (MID)

• MIPI M-PHY and D-PHY as used in Camera Serial Interface (CSI) and Display Serial Interface

(DSI)