SPECIFICATION AND PERFORMANCE

SERIES:

112A-TAAR-R03

FILE:

112A-TAAR-R03_spec

DATE:

2012/09/12

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-2 -

ELECTRICAL

Item

Requirement

Test Condition

Rating Current

0.5A (Max.)/(1PIN)

Rating Voltage

100V AC/DC

Contact Resistance

Initial: 50 mΩ (Max)

Solder connectors on PCB and mate them together,

measure by applying closed circuit current of 10mA

maximum at open circuit voltage of 20mV (max).

(JIS C5402 5.4)

Insulation Resistance

Initial:1,000 MΩ(Min). Apply 500V DC between adjacent contacts, or contact

and ground. (MIL-STD-202 METHOD 302)

Dielectric Withstanding

Voltage

No breakdown

Mate connectors; apply 500V AC (rms.) between two

adjacent for 1 minute. (Trip current:1mA)

(MIL-STD-202 METHOD 301)

MECHANICAL

Item

Requirement

Test Condition

Contact Retention Force

2.5N per pin (Min.)

Place a connector on the push-pull machine, then

apply a force on a contact head and push the contact to

the opposite direction of the contact insertion at the

speed of 25 ± 3mm/min. (EIA364-29)

Durability

Finish

1.Contact Resistance:

80mΩ(Max)

2.No Damage

Solder connectors on PCB, then place them on the

pull-push machine, and repeat mating and un-mating

10,000cycles repeatedly at a rate of 400~600

cycles/hour. (EIA364-09)

Vibration

Finish

1. No electrical

discontinuity more

than 0.1μs.

2 .No Damage

3. Contact Resistance:

80mΩ(Max)

Mate dummy card and subject to the following

vibration conditions, for a period of 30 minutes in each

of 3 mutually perpendicular axis, passing DC 1 mA

during the test.

Amplitude: 1.52 mm P-P or 19.6 m/s2

Frequency: 10-55-10Hz

Shall be traversed in 1minute.

(MIL-STD-202 METHOD 201)