SERIES:

112C-TXAR-R02

FILE:

112C-TXAR-R02_spec

SPECIFICATION AND PERFORMANCE

DATE:

2012/10/25

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

‐4 ‐ 

100MΩ Min.

Humidity

1.Appearance : No

evidence of physical

damage.

2. Contact resistance:

100mΩ Max.

3.Insulation resistance:

100MΩ Min.

The specimens shall be placed in a No

evidence of chamber and subjected to a

relative humidity of 90% to 95% and a

temperature of 40±2℃ for 96 hours, then

placed in ambient temperature for more

than 1 hour.

EIA-RS-364-31A

Salt Spray

Contact resistance:

100mΩ Max(Finally).

The specimens shall be subjected to a salt

water spray (concentration : 5±1%) at a

temperature of 35±2℃ for 24 hours, then

placed in ambient temperature for more

than 1 hour.

EIA-RS-364-26A

SOLDER ABILITY

Item

Requirement

Test Condition

Solder ability

1. Appearance: No

evidence of

Physical damage.

2. More than 95%

of the solder able

area shall be

covered with

solder.

After 5~10 seconds flux deep. Subject

connector lead to solder bath at 235°C±3°C

for 5±0.5 seconds.

MIL-STD-202F, Method 208

Resistance to

Soldering heat

No evidence of

Physical damage.

The connector shall be tested resistance. To

soldering heat in the following conditions.

For RoHS 260℃ 10±0.5 seconds.