SERIES:

112C-TXAR-R02

FILE:

112C-TXAR-R02_spec

SPECIFICATION AND PERFORMANCE

DATE:

2012/10/25

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

‐3 ‐ 

Retention Force

100 gf/pin Min.

Apply axial pull out force at the speed

rate of 25±3 mm/minute.

EIA-364-05

Mechanical Shock

Contact Resistance:

100mΩ max

Appearance:

No visual damage

Discontinuity:

1.0 μsec Max.

Mate connector and subject the following

shock conditions. 3 shocks shall be

applied along 3 mutually perpendicular

axes.

Test pulse: Half Sine

Peak value: 490 m/s2 (50 G)

Velocity change: 3.44 m/s

Pulse duration: 11 msec

EIA-364-27, test condition A

ENVIRONMENTAL

Item

Requirement

Test Condition

Temperature

Life( Heat )

1.Appearance : No

evidence of physical

damage.

2.Contact Resistance:

100mΩ Max.(Finally)

3.Insulation Resistance:

100MΩ Min.

The specimens shall be subjected to a

temperature of 85℃ for 96 hours, then

placed in ambient temperature for more

than 3 hours.

MIL-STD-1344A, Method 1005.1

Temperature

Life( Cold )

1.Appearance : No

evidence of physical

damage.

2.Contact Resistance:

100mΩ Max.(Finally)

3.Insulation Resistance:

The specimens shall be subjected to a

temperature of -25℃ for 96 hours, then

placed in ambient temperature for more

than 3 hours.

MIL-STD-1344A, Method 1005.1