SERIES:

112C-TXAR-R02

FILE:

112C-TXAR-R02_spec

SPECIFICATION AND PERFORMANCE

DATE:

2012/10/25

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

‐2 ‐ 

ELECTRICAL

Item

Requirement

Test Condition

Contact Resistance

80mΩ Max.

The T-FLASH SOCKET and T-FLASHCARD

were mated. Low-level current was applied

and resistance measurements were taken.

(20mV Max., 10mA) EIA-RS -364-23A

Insulation Resistance 1000MΩ Min.

Test between adjacent contacts on

unmated connectors at the potential of

500V DC. It was applied between all

contacts.

EIA-RS-364-21A

Dielectric

Withstanding Voltage

1. 500V AC R.M.S. for

one minute.

2. No evidence of

flashover or

breakdown.

The potential was applied between

adjacent contacts of the connector for one

minute.

EIA- RS-364-20A

MECHANICAL

Item

Requirement

Test Condition

Durability

1. Appearance :

No evidence of

physical damage.

2.Contact resistance:

100mΩ Max(Finally).

Mating and un mating samples for 5000

cycles at maximum rate of 600 cycles per

hour.

EIA- RS-364-09A

Vibration

1.Appearance :

No evidence of

physical damage.

2.Open circuit less

than 1 microsecond.

The entire frequency range, from 10 to 55

Hz and return to 10Hz shall be traversed in

approximately 1 minute.

This motion shall be applied for 2 hours in

each of 3 mutually perpendicular

directions. (total of 6 hours) Amplitude:

1.50mm Max.

EIA-RS-364-28A, Condition Ⅰ