SPECIFICATION AND PERFORMANCE

SERIES:

DDR Series

FILE:

DDR Series_spec

DATE:

2013/01/04

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-2 -

ELECTRICAL

Item

Requirement

Test Condition

Contact Resistance

Initial: 60 mΩ Max.

Final: 80 mΩ Max.

Solder connectors on PCB and mate them

together, measure by applying closed

circuit current of 10mA maximum at open

circuit voltage of 20mV maximum.

Insulation Resistance Initial: 500MΩ Min.

Final: 100MΩ Min.

Mate connectors, apply 100V DC (rms.)

between two adjacent contacts for one

minutes.[MIL STD. 202F, Method 302]

Dielectric

Withstanding Voltage

125VAC for1 minutes.

Leak current:

0.5 [mA] Max.

Mate connectors, apply 125V AC (rms.)

between two adjacent contacts for one

minutes.[MIL STD. 202F, Method 301]

MECHANICAL

Item

Requirement

Test Condition

Durability

No Damage

Solder connectors on PCB, then repeat

mating and unmating 25 cycles along the

mating axis.

Contact Retention

Force

1 N/pos. Min

Place a connector on the push-pull

machine, then apply a force on a contact

head and push the contact to the opposite

direction of the contact insertion at the

speed of 25±3mm/min. Measure the force

when the contact dislodges from insulator.

Latch Spring

Retention Force

8 N/Pos. Min

Place a connector on the push-pull

machine, then apply a force on a contact

head and push the latch spring to the

opposite direction of the latch spring

insertion at the speed of 25±3mm/min.

Measure the force when the latch spring

dislodges from insulator.