SPECIFICATION AND PERFORMANCE

SERIES:

DDR Series

FILE:

DDR Series_spec

DATE:

2013/01/04

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-3 -

Vibration

No electrical

discontinuity greater

than 1 µ second shall

occur.

Solder connectors on PCB and mate them

together, subject to the following vibration

conditions, for a period of 2 hours in each

of 3 mutually perpendicular axes, passing

DC 1mA current during test.

Amplitude: 1.52 mm P-P

Sweep Frequency.: 10 - 55 - 10 Hz /min

[MIL STD. 202F, Method 201A]

Shock

No electrical

discontinuity greater

than 1 μsec shall

occur.

Solder connectors on PCB and mate them

together, subject to the following shock

conditions, 3 shocks shall be period along

3 mutually perpendicular axes, passing DC

1mA current during the test.

(Total of 18 shocks)

Test Pulse :

Half sinusoidal-Peak 490 m/s2 (50G)

Duration: 11 msec.

[MIL STD. 202F, Method 213A]

ENVIRONMENTAL

Item

Requirement

Test Condition

Heat Resistance

Detrimental damage

affecting to the

performance shall not

occur.

Solder connectors on PCB and mate them

together, expose to 85±2℃ for 96hours.

Upon completion of the exposure period,

the test specimens shall be conditioned at

ambient room conditions for 1 to 2 hours,

after which the specified measurements

shall be performed.

[MIL STD. 202F, Method 108A]