M41T62 datasheet(18/40 Pages) STMICROELECTRONICS

18 / 40 page

Clock operation

M41T62/63/64/65

18/40

3.1

TIMEKEEPER® registers

The M41T6x offers 16 internal registers which contain Clock, Calibration, Alarm, Watchdog,

Flags, and Square Wave. The Clock registers are memory locations which contain external

(user accessible) and internal copies of the data (usually referred to as BiPORT™

TIMEKEEPER cells). The external copies are independent of internal functions except that

they are updated periodically by the simultaneous transfer of the incremented internal copy.

The internal divider (or clock) chain will be reset upon the completion of a WRITE to any

clock address (00h to 07h).

The system-to-user transfer of clock data will be halted whenever the address being read is

a clock address (00h to 07h). The update will resume either due to a Stop Condition or when

the pointer increments to a non-clock address.

TIMEKEEPER and Alarm Registers store data in BCD format. Calibration, Watchdog, and

Square Wave Bits are written in a Binary Format.

M41T62 数据表(PDF) 18 Page - STMicroelectronics