AD8061/AD8062/AD8063

Rev. D | Page 6 of 20

ABSOLUTE MAXIMUM RATINGS

Table 4.

Parameter

Rating

Supply Voltage

8 V

Internal Power Dissipation1

8-lead SOIC (R)

0.8 W

5-lead SOT-23 (RT)

0.5 W

6-lead SOT-23 (RT)

0.5 W

8-lead MSOP (RM)

0.6 W

Input Voltage (Common-Mode)

Differential Input Voltage

Output Short-Circuit Duration

Observe Power Derating Curves

Storage Temperature Range

R-8, RM-8, SOT-23-5, SOT-23-6

−65°C to +125°C

Operating Temperature Range

−40°C to +85°C

Lead Temperature Range

(Soldering 10 sec)

300°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to

absolute maximum rating conditions for extended periods

may affect device reliability.

MAXIMUM POWER DISSIPATION

The maximum power that can be safely dissipated by the

AD806x is limited by the associated rise in junction temperature.

The maximum safe junction temperature for plastic encapsulated

devices is determined by the glass transition temperature of the

plastic, approximately 150°C. Temporarily exceeding this limit

may cause a shift in parametric performance due to a change in

the stresses exerted on the die by the package. Exceeding a junc-

tion temperature of 175°C for an extended period can result in

device failure. While the AD806x is internally short-circuit

protected, this may not be sufficient to guarantee that the

maximum junction temperature (150°C) is not exceeded

under all conditions.

To ensure proper operation, it is necessary to observe the

maximum power derating curves.

AMBIENT TEMPERATURE (

°C)

2.0

1.0

0

–50 –40 –30

70

80

90

1.5

0.5

60

50

40

30

0

–10

–20

20

10

MSOP

SOT-23-5, -6

8-LEAD SOIC

PACKAGE

Figure 6. Maximum Power Dissipation vs. Temperature for

AD8061/AD8062/AD8063

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.