33742S datasheet(9/65 Pages) FREESCALE

9 / 65 page

Analog Integrated Circuit Device Data

Freescale Semiconductor

33742

ELECTRICAL CHARACTERISTICS

STATIC ELECTRICAL CHARACTERISTICS

Table 5. Static Electrical Characteristics

Characteristics noted under conditions 4.75 V

≤ V2 ≤ 5.25 V, 5.5 V ≤ VSUP ≤ 18 V, and -40°C ≤ TA ≤ 125°C. Typical values

noted reflect the approximate parameter mean at TA = 25°C under nominal conditions unless otherwise noted.

Characteristic

Symbol

Min

Typ

Max

Unit

INPUT PIN (VSUP)

Supply Voltage

Nominal DC Voltage

Extended DC Voltage: Full Functionality (8)

Extended DC Voltage: Reduced Functionality (9)

Load Dump

Jump Start

VSUP

5.5

4.5

—

5.5

Supply Current in Standby Mode (10)

(IOUT at VDD = 40 mA, CAN Recessive or Sleep Mode)

TA ≥ 25°C

ISUP(STDBY)

—

Supply Current in Normal Mode (10)

(IOUT at VDD = 40 mA, CAN Recessive or Sleep Mode)

TA ≥ 25°C

ISUP(NORM)

—

Supply Current in Sleep Mode (10)

(VDD and V2 OFF, CAN in Sleep Mode with CAN Wake-Up Disabled (11))

VSUP < 13.5 V, Oscillator Running (12)

VSUP < 13.5 V, Oscillator Not Running (13)

VSUP = 18 V, Oscillator Running (12)

ISUP(SLP-WD)

—

110

105

140

µA

Supply Current in Sleep Mode (10)

(V1 and V2 OFF, VSUP < 13.5 V, Oscillator Not Running (13), CAN in Sleep

Mode with Wake-Up Enabled)

TA = -40°C

TA = 25°C

TA = 125°C

ISUP(SLP-WE)

—

µA

Supply Current in Stop Mode (10)

(IOUT at VDD < 2.0 mA, VDD ON, CAN in Sleep Mode with Wake-Up

Disabled (11))

VSUP < 13.5 V, Oscillator Running (12)

VSUP < 13.5 V, Oscillator Not Running (13)

VSUP = 18 V, Oscillator Running (12)

ISUP(STOP-WD)

—

100

160

210

µA

Notes

All functions and modes available and operating: Watchdog, HS turn ON/turn OFF, CAN transceiver operating, L0:L3 inputs operating,

normal SPI operation. The 33742 may experience an over temperature fault.

At VDD > 4.0 V, RST HIGH if reset 2 selected via SPI. The logic HIGH level will be degraded but the 33742 is functional.

10.

Current measured at VSUP pin.

11.

If CAN Module is Sleep-Enabled for wake-up, an additional current (ICAN-SLEEP) must be added to specified value.

12.

Oscillator running means one of the following function is active: Forced Wake-Up or Cyclic Sense or Software Watchdog in Stop mode.

13.

Oscillator not running means none of the following functions are active: Forced Wake-Up and Cyclic Sense and Software Watchdog in

Stop mode.

33742S 数据表(PDF) 9 Page - Freescale Semiconductor, Inc

33742S 数据表(HTML) 9 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65

数据表下载