MPC8555VTAPF datasheet(84/88 Pages) FREESCALE

84 / 88 page

MPC8555E PowerQUICC™ III Integrated Communications Processor Hardware Specifications, Rev. 4

Freescale Semiconductor

Document Revision History

18 Document Revision History

Table 58 provides a revision history for this hardware specification.

19 Device Nomenclature

Ordering information for the parts fully covered by this specification document is provided in

Section 19.1, “Nomenclature of Parts Fully Addressed by this Document.”

19.1

Nomenclature of Parts Fully Addressed by this Document

Table 52 provides the Freescale part numbering nomenclature for the MPC8555E. Note that the individual

part numbers correspond to a maximum processor core frequency. For available frequencies, contact your

Table 51. Document Revision History

Rev. No.

Date

Substantive Change(s)

12/2006

Updated Section 2.1.2, “Power Sequencing.”

Updated back page information.

3.2

11/2006

Updated Section 2.1.2, “Power Sequencing.”

Replaced Section 17.8, “JTAG Configuration Signals.”

3.1

10/2005

Table 4: Added footnote 2 about junction temperature.

Table 4: Added max. power values for 1000 MHz core frequency.

Removed Figure 3, “Maximum AC Waveforms on PCI Interface for 3.3-V Signaling.”

Table 30: Modified note to tLBKSKEW from 8 to 9

Table 30: Changed tLBKHOZ1 and tLBKHOV2 values.

Table 30: Added note 3 to tLBKHOV1.

Table 30 and Table 31: Modified note 3.

Table 31: Added note 3 to tLBKLOV1.

Table 31: Modified values for tLBKHKT, tLBKLOV1, tLBKLOV2, tLBKLOV3, tLBKLOZ1, and tLBKLOZ2.

Figure 20: Changed Input Signals: LAD[0:31]/LDP[0:3].

Table 43: Modified note for signal CLK_OUT.

Table 43: PCI1_CLK and PCI2_CLK changed from I/O to I.

Table 52: Added column for Encryption Acceleration.

8/29/2005

Table 4: Modified max. power values.

Table 43: Modified notes for signals TSEC1_TXD[3:0], TSEC2_TXD[3:0], TRIG_OUT/READY,

MSRCID4, CLK_OUT, and MDVAL.

8/2005

Previous revision’s history listed incorrect cross references. Table 2 is now correctly listed as

Table 27 and Table 38 is now listed as Table 31.

Table 7: Added note 2.

Table 14: Modified min and max values for tDDKHMP

16/2005

Table 27: Changed LVdd to OVdd for the supply voltage Ethernet management interface.

Table 4: Modified footnote 4 and changed typical power for the 1000MHz core frequency.

Table 31: Corrected symbols for body rows 9–15, effectively changing them from a high state to a

low state.

6/2005

Initial Release.

MPC8555VTAPF 数据表(PDF) 84 Page - Freescale Semiconductor, Inc

MPC8555VTAPF 数据表(HTML) 84 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载