ADIN1300BCPZ-R7 datasheet(93/96 Pages) AD

93 / 96 page

Data Sheet

ADIN1300

analog.com

Rev. B | 93 of 96

Table 137. Bit Descriptions for GE_IO_INT_N_OR_CNTRL (Continued)

Bits

Bit Name

Description

Reset

Access

110: TX_ER.

101: COL.

100: CRS.

011: receive start of packet indication.

010: transmit start of packet indication.

001: link status.

000: default function, INT_N. The default function when configured for MII MAC interface with EEE

advertisement disabled from hardware pin configuration is CRS. In all other cases, the pin function is

INT_N.

Subsystem LED_0 Pin Override Control Register

Address: 0xFF41, Reset: 0x0000, Name: GE_IO_LED_A_OR_CNTRL

This register allows the default function of the LED_0 pin to be overridden.

Table 138. Bit Descriptions for GE_IO_LED_A_OR_CNTRL

Bits

Bit Name

Description

Reset

Access

[15:4]

RESERVED

Reserved.

0x0

[3:0]

GE_IO_LED_A_OR_CNTRL

This bit field allows the default function of the LED_0 pin to be overridden.

0x0

R/W

1111: LED_0.

1110: LED_0.

1101: LED_0.

1100: LED_0.

1011: LED_0.

1010: LED_0.

1001: reserved.

1000: reserved.

0111: LED_0.

0110: TX_ER.

0101: COL.

0100: CRS.

0011: receive start of packet indication.

0010: transmit start of packet indication.

0001: link status.

0000: default function, LED_0. When configured for MII MAC interface with EEE advertisement

disabled from the hardware configuration pins, the default function is COL. When configured for

MII MAC interface with EEE advertisement enabled from the hardware pin configuration, the default

function is TX_ER. In all other cases, the default is LED_0.

ADIN1300BCPZ-R7 数据表(PDF) 93 Page - Analog Devices

ADIN1300BCPZ-R7 数据表(HTML) 93 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96

数据表下载