AD8067ART-R2 datasheet(17/24 Pages) AD

17 / 24 page

Data Sheet

AD8067

Rev. B | Page 17 of 24

Grounding

To minimize parasitic inductances and ground loops in high

speed, densely populated boards, a ground plane layer is critical.

Understanding where the current flows in a circuit is critical in

the implementation of high speed circuit design. The length of

the current path is directly proportional to the magnitude of the

parasitic inductances and thus the high frequency impedance of

the path. Fast current changes in an inductive ground return

creates unwanted noise and ringing.

The length of the high frequency bypass capacitor leads is

critical. A parasitic inductance in the bypass grounding works

against the low impedance created by the bypass capacitor.

Because load currents flow from supplies as well as ground, the

load should be placed at the same physical location as the

bypass capacitor ground. For large values of capacitors, which

are intended to be effective at lower frequencies, the current

return path length is less critical.

Power Supply Bypassing

Power supply pins are actually inputs and care must be taken to

provide a clean, low noise dc voltage source to these inputs. The

bypass capacitors have two functions:

• Provide a low impedance path for unwanted frequencies

from the supply inputs to ground, thereby reducing the effect

of noise on the supply lines

• Provide localized charge storage—this is usually

accomplished with larger electrolytic capacitors

Decoupling methods are designed to minimize the bypassing

impedance at all frequencies. This can be accomplished with a

combination of capacitors in parallel to ground. Good quality

ceramic chip capacitors (X7R or NPO) should be used and

always kept as close to the amplifier package as possible. A

parallel combination of a 0.1 µF ceramic and a 10 µF electrolytic,

covers a wide range of rejection for unwanted noise. The 10 µF

capacitor is less critical for high frequency bypassing, and in

most cases, one per supply line is sufficient.

AD8067ART-R2 数据表(PDF) 17 Page - Analog Devices

AD8067ART-R2 数据表(HTML) 17 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

数据表下载