T48C862-R8 datasheet(46/107 Pages) ATMEL

46 / 107 page

T48C862-R8

4590B–4BMCU–02/03

The 4-bit stage is used as programmable prescaler for the 8-bit counter stage. In this

mode, a duty cycle stage is also available. This stage can be used as an additional 2-bit

prescaler or for generating duty cycles of 25%, 33% and 50%. The 4-bit compare output

(CM1) supplies the clock output (POUT) with clocks.

Mode 3/4: 8-bit Compare

Counter and 4-bit

Programmable Prescaler

Figure 38. 4-/8-bit Compare Counter

In these modes the 4-bit and the 8-bit counter stages work independently as a 4-bit

prescaler and an 8-bit timer with an 2-bit prescaler or as a duty cycle generator. Only in

the mode 3 and mode 4, can the 8-bit counter be supplied via the external clock input

(T2I) which is selected via the P4CR register. The 4-bit prescaler is started via activating

of mode 3 and stopped and reset in mode 4. Changing mode 3 and 4 has no effect for

the 8-bit timer stage. The 4-bit stage can be used as prescaler for Timer 3, the SSI or to

generate the stop signal for modulator 2 and modulator 3.

Timer 2 Output Modes

The signal at the timer output is generated via modulator 2. In the toggle mode, the com-

pare match event toggles the output T2O. For high resolution duty cycle modulation 8

bits or 12 bits can be used to toggle the output. In the duty cycle burst modulator modes

the DCG output is connected to T2O and switched on and off either by the toggle flipflop

output or the serial data line of the SSI. Modulator 2 also has two modes to output the

content of the serial interface as Biphase or Manchester code.

The modulator output stage can be configured by the output control bits in the T2M2

stopped either by carrying out a shift register stop (SIR = 1) or compare match event of

stage 1 (CM1) of Timer 2. For this task, Timer 2 mode 3 must be used and the prescaler

has to be supplied with the internal shift clock (SCL).

4-bit counter

4-bit compare

RES

4-bit register

8-bit counter

8-bit compare

8-bit register

OVF2

CM2

RES

T2RM

T2OTM

Timer 2

output mode

and T2OTM-bit

T2IM

T2CTM

TOG2

INT4

CL2/2

DCG

T2D1, 0

DCGO

P41M2, 1

P4CR

CM1

POUT

CL2/1

MUX

TOG3

T1OUT

SYSCL

SCL

T2CS1, 0

SYSCL

T2I

T48C862-R8 数据表(PDF) 46 Page - ATMEL Corporation

T48C862-R8 数据表(HTML) 46 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载