| 数据搜索系统,热门电子元器件搜索 |
|
FAN-7002-R 数据表(PDF) 5 Page - Arista Networks, Inc |
|
|
|||||||||||||||||||||||||||||
FAN-7002-R 数据表(HTML) 5 Page - Arista Networks, Inc |
|
5 / 66 page ![]() Chapter 1 Overview 1.1 Scope This guide is intended for properly trained service personnel and technicians who need to install Arista Networks Data Center Switches. This guide is intended for the following Arista Networks Data Center Switches: DCS-7304 DCS-7304X3 DCS-7308 DCS-7308X3 DCS-7316 DCS-7324 DCS-7328 Important: Only qualified personnel should install, service, or replace this equipment. Seul le personnel qualifié doit installer, service, ou remplacer cet équipement. 1.2 Receiving and Inspecting the Equipment Upon receiving the switch, inspect the shipping boxes and record any external damage. Retain packing materials if you suspect that part of the shipment is damaged; the carrier may need to inspect them. If the boxes were not damaged in transit, unpack them carefully. Ensure that you do not discard any accessories that may be packaged in the same box as the main unit. Inspect the packing list and confirm that you received all listed items. Compare the packing list with your purchase order. Parts List provides a list of components included with the switch. 1.3 Installation Process The following tasks are required to install and use the switch: 1. Select and prepare the installation site (Site Selection). 2. Assemble the installation tools listed (Tools Required for Installation). 3. Attach the mounting brackets and install the switch in an equipment rack (Two-Post Rack Mount ). 4. Connect the switch to the power source and network devices ( Powering the Modular Switch and Connecting Serial and Management Cables). 5. Configure the switch (Configuring the Switch). Important: Class 1 Laser Product: This product has provisions to install Class 1 laser transceivers that provides optical coupling to the communication network. Once a Class 1 laser product is installed, the equipment is a Class 1 Laser Product (Appareil à Laser de Classe 1). The customer is responsible for selecting and installing the Class 1 laser transceiver and for insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |