 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
ADL5513ACPZ-R2 数据表(PDF) 6 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADL5513ACPZ-R2 数据表(HTML) 6 Page - Analog Devices |
|
|
6 / 25 page  Data Sheet ADL5513 SPECIFICATIONS analog.com Rev. B | 6 of 25 Table 1. (Continued) Parameter Test Conditions/Comments Min Typ Max Unit −40°C < TA < +25°C; PIN = −50 dBm +0.41/−0.62 dB 25°C < TA < 125°C; PIN = −50 dBm +0.8/−0.18 dB Logarithmic Slope 22.5 mV/dB Logarithmic Intercept −87 dBm Input Impedance 0.5/0.4 kΩ/pF SETPOINT INPUT Pin VSET Nominal Range Log conformance error ≤ ±1 dB, RF input = 8 dBm 2 V Log conformance error ≤ ±1 dB, RF input = −62 dBm 0.58 V Logarithmic Scale Factor 47.1 dB/ V Input Impedance 40 kΩ OUTPUT INTERFACE Pin VOUT Voltage Swing VSET = 0 V, RF input = open 0.47 V VSET = 0.47 V, RF input = open 4.7 V Capacitance Drive CLPF = open 47 pF Capacitance Drive CLPF = 20 pF 1 nF Current Source/Sink Output held at 1 V to 1% change 55/0.64 mA Output Noise RF input = 100 MHz, 0 dBm fNOISE = 100 kHz, CLPF = open 145 nV/√Hz fNOISE = 100 kHz, CLPF = 1 nF 82 nV/√Hz PULSE RESPONSE TIME Input level = no signal to 0 dBm, 90% to 10% Fall Time CLPF = open, 1 µs pulse width 21 ns CLPF = open, 500 µs pulse width 20 ns Rise Time CLPF = open, 1 µs pulse width 20 ns CLPF = open, 500 µs pulse width 20 ns Fall Time CLPF = 1000 pF, 10 µs pulse width 4.2 µs CLPF = 1000 pF, 500 µs pulse width 5.5 µs Rise Time CLPF = 1000 pF, 10 µs pulse width 3.2 µs CLPF = 1000 pF, 500 µs pulse width 4.3 µs Small Signal Video Bandwidth (or Envelope Bandwidth) CLPF = open, 3 dB video bandwidth 10 MHz TEMPERATURE ADJUST/POWER-DOWN INTERFACE Pin TADJ Temperature Adjust Useful Range 0 to 1.3 V Minimum Logic Level to Disable Logic high disables VPOS − 0.3 V Input Current Logic high TADJ = 0 V 31 mA Logic low TADJ = 4.7 V 200 µA Enable Time PWDN low to VOUT at 100% final value, PWDN high to VOUT at 10% final value CLPF = open, RF input = 0 dBm, 100 MHz, 1 µs pulse width 84 ns CLPF = 1000 pF, RF input = 0 dBm, 100 MHz, 1 µs pulse width 10.8 µs Disable Time CLPF = open, RF input = 0 dBm, 100 MHz, 1 µs pulse width 165 ns CLPF = 1000 pF, RF input = 0 dBm, 100 MHz, 1 µs pulse width 1.2 µs Input Impedance1 TADJ = 0.9 V, sourcing 70 µA 13 kΩ POWER SUPPLY INTERFACE Pin VPOS Supply Voltage 2.7 5.5 V Quiescent Current 25°C, RF input = −55 dBm 31 mA Supply Current When disabled <0.2 mA 1 See the Temperature Compensation of Output Voltage section. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
