| 数据搜索系统,热门电子元器件搜索 |
|
HYS64T64020HDL 数据表(PDF) 26 Page - Qimonda AG |
|
|
|||||||||||||||||||||||||||||
HYS64T64020HDL 数据表(HTML) 26 Page - Qimonda AG |
|
26 / 70 page ![]() Internet Data Sheet Rev. 1.1, 2006-10 26 03292006-5LTN-QML0 HYS64T[32/64/128]xxxHDL-[25F/2.5/3/3S/3.7/5]-B SO-DIMM DDR2 SDRAM Module TABLE 18 DRAM Component Timing Parameter by Speed Grade - DDR2–533 Parameter Symbol DDR2–533 Unit Note1)2)3)4)5) 6)7) Min. Max. DQ output access time from CK / CK t AC –500 +500 ps CAS A to CAS B command period t CCD 2— t CK CK, CK high-level width t CH 0.45 0.55 t CK CKE minimum high and low pulse width t CKE 3— t CK CK, CK low-level width t CL 0.45 0.55 t CK Auto-Precharge write recovery + precharge time t DAL WR + t RP — t CK 8)18) Minimum time clocks remain ON after CKE asynchronously drops LOW t DELAY t IS + tCK + tIH –– ns 9) DQ and DM input hold time (differential data strobe) t DH(base) 225 –– ps 10) DQ and DM input hold time (single ended data strobe) t DH1(base) –25 — ps 11) DQ and DM input pulse width (each input) t DIPW 0.35 — t CK DQS output access time from CK / CK t DQSCK –450 +450 ps DQS input low (high) pulse width (write cycle) t DQSL,H 0.35 — t CK DQS-DQ skew (for DQS & associated DQ signals) t DQSQ — 300 ps 11) Write command to 1st DQS latching transition t DQSS – 0.25 + 0.25 t CK DQ and DM input setup time (differential data strobe) t DS(base) 100 — ps 11) DQ and DM input setup time (single ended data strobe) t DS1(base) –25 — ps 11) DQS falling edge hold time from CK (write cycle) t DSH 0.2 — t CK DQS falling edge to CK setup time (write cycle) t DSS 0.2 — t CK Clock half period t HP MIN. ( t CL, tCH)— 12) Data-out high-impedance time from CK / CK t HZ — t AC.MAX ps 13) Address and control input hold time t IH(base) 375 — ps 11) Address and control input pulse width (each input) t IPW 0.6 — t CK Address and control input setup time t IS(base) 250 — ps 11) DQ low-impedance time from CK / CK t LZ(DQ) 2 × t AC.MIN t AC.MAX ps 14) DQS low-impedance from CK / CK t LZ(DQS) t AC.MIN t AC.MAX ps 14) Mode register set command cycle time t MRD 2— t CK OCD drive mode output delay t OIT 012 ns Data output hold time from DQS t QH t HP –tQHS —— Data hold skew factor t QHS — 400 ps |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |