| 数据搜索系统,热门电子元器件搜索 |
|
HYS64T64020HDL 数据表(PDF) 29 Page - Qimonda AG |
|
|
|||||||||||||||||||||||||||||
HYS64T64020HDL 数据表(HTML) 29 Page - Qimonda AG |
|
29 / 70 page ![]() Internet Data Sheet Rev. 1.1, 2006-10 29 03292006-5LTN-QML0 HYS64T[32/64/128]xxxHDL-[25F/2.5/3/3S/3.7/5]-B SO-DIMM DDR2 SDRAM Module DQS falling edge hold time from CK (write cycle) t DSH 0.2 — t CK DQS falling edge to CK setup time (write cycle) t DSS 0.2 — t CK Clock half period t HP MIN. ( t CL, tCH) 12) Data-out high-impedance time from CK / CK t HZ — t AC.MAX ps 13) Address and control input hold time t IH(base) 475 — ps 11) Address and control input pulse width (each input) t IPW 0.6 — t CK Address and control input setup time t IS(base) 350 — ps 11) DQ low-impedance time from CK / CK t LZ(DQ) 2 × t AC.MIN t AC.MAX ps 14) DQS low-impedance from CK / CK t LZ(DQS) t AC.MIN t AC.MAX ps 14) Mode register set command cycle time t MRD 2— t CK OCD drive mode output delay t OIT 012 ns Data output hold time from DQS t QH t HP –tQHS —— Data hold skew factor t QHS — 450 ps Average periodic refresh Interval t REFI —7.8 µs 14)15) —3.9 µs 16)18) Auto-Refresh to Active/Auto-Refresh command period 105 — ns 17) Precharge-All (4 banks) command period t RP t RP +1tCK —ns Precharge-All (8 banks) command period t RP 15 + 1 t CK —ns Read preamble t RPRE 0.9 1.1 t CK 14) Read postamble t RPST 0.40 0.60 t CK 14) Active bank A to Active bank B command period t RRD 7.5 — ns 14)18) 10 — ns 16)20) Internal Read to Precharge command delay t RTP 7.5 — ns Write preamble t WPRE 0.25 x t CK — t CK Write postamble t WPST 0.40 0.60 t CK 19) Write recovery time for write without Auto- Precharge t WR 15 — ns Write recovery time for write with Auto- Precharge WR t WR/tCK — t CK 20) Internal Write to Read command delay t WTR 10 — ns 21) Exit power down to any valid command (other than NOP or Deselect) t XARD 2— t CK 22) Exit active power-down mode to Read command (slow exit, lower power) t XARDS 6 – AL — t CK 22) Exit precharge power-down to any valid command (other than NOP or Deselect) t XP 2— t CK Exit Self-Refresh to non-Read command t XSNR t RFC +10 — ns Exit Self-Refresh to Read command t XSRD 200 — t CK Parameter Symbol DDR2–400 Unit Note1)2)3)4)5) 6)7) Min. Max. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |