| 数据搜索系统,热门电子元器件搜索 |
|
ADBMS1818ASWAZ-R7 数据表(PDF) 5 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADBMS1818ASWAZ-R7 数据表(HTML) 5 Page - Analog Devices |
|
5 / 92 page ![]() Data Sheet ADBMS1818 SPECIFICATIONS analog.com Rev. B | 5 of 92 Table 1. (Continued) Parameter Test Conditions/Comments Min Typ Max Unit VREF2 pin, apply over the full specified temperature range –0.18 0.05 0.32 % Digital supply voltage, VREGD, apply over the full specified temperature range –2.5 –0.4 2 % Input Range C(n), n = 1 to 18, apply over the full specified temperature range C(n–1) C(n–1) + 5 V C0, apply over the full specified temperature range 0 1 V GPIO(n), n = 1 to 9, apply over the full specified temperature range 0 5 V Input Leakage Current (IL) When Inputs Are Not Being Measured C(n), n = 0 to 18, apply over the full specified temperature range 10 ±250 nA GPIO(n), n = 1 to 9, apply over the full specified temperature range 10 ±250 nA Input Current When Inputs Are Being Measured (State: Core = Measure) C(n), n = 0 to 18 ±1 μA GPIO(n), n = 1 to 9 ±1 μA Input Current During Open Wire Detection Apply over the full specified temperature range 70 100 130 μA 1 The ADC specifications are guaranteed by the TME specification. VOLTAGE REFERENCE SPECIFICATIONS Table 2. Parameter Test Conditions/Comments Min Typ Max Unit 1st Reference Voltage (VREF1) VREF1 pin, no load, apply over the full specified temperature range 3.0 3.15 3.3 V 1st Reference Voltage Temperature Coefficient (TC) VREF1 pin, no load 3 ppm/°C 1st Reference Voltage Thermal Hysteresis VREF1 pin, no load 20 ppm 1st Reference Voltage Long Term Drift VREF1 pin, no load 20 ppm/√KHR 2nd Reference Voltage (VREF2) VREF2 pin, no load, apply over the full specified temperature range 2.993 3 3.007 V VREF2 pin, 5 kΩ load to V−, apply over the full specified temperature range 2.992 3 3.008 V 2nd Reference Voltage TC VREF2 pin, no load 10 ppm/°C 2nd Reference Voltage Thermal Hysteresis VREF2 pin, no load 100 ppm 2nd Reference Voltage Long Term Drift VREF2 pin, no load 60 ppm/√KHR GENERAL DC SPECIFICATIONS Table 3. Parameter Test Conditions/Comments Min Typ Max Unit V+ Supply Current (IVP) (See Figure 53) State: core = sleep, isoSPI = idle, VREG = 0 V 6.1 11 µA State: core = sleep, isoSPI = idle, VREG = 0 V, apply over the full specified temperature range 6.1 18 µA State: core = sleep, isoSPI = idle, VREG = 5 V 3 5 µA State: core = sleep, isoSPI = idle, VREG = 5 V, apply over the full specified temperature range 3 9 µA State: core = standby 9 14 22 µA State: core = standby, apply over the full specified temperature range 6 14 28 µA State: core = REFUP 0.4 0.55 0.8 mA State: core = REFUP, apply over the full specified temperature range 0.375 0.55 0.825 mA State: core = measure 0.65 0.95 1.35 mA |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |