Advanced Pulse analysis

The Advanced Pulse Analysis package (SVP) provides 31 individual

measurements to automatically characterize long pulse trains. An 800 MHz

wide LFM chirp centered at 18 GHz is seen here with measurements for

pulses 7 through 18 (upper right). The shape of the pulse can be seen in

the Amplitude vs Time plot shown in the upper left. Detailed views of pulse

#8's frequency deviation and parabolic phase trajectory are shown in the

lower two views.

Cumulative statistics provides timestamps for Min, Max values as well as Peak to Peak,

Average and Standard deviation over multiple acquisitions, further extending the

analysis. Histogram shows you outliers on the right and left.

Pulse-Ogram displays a waterfall of multiple segmented captures, with correlated

amplitude vs time and spectrum of each pulse. Can be used with an external trigger to

show target range and speed.

Education license

Qualified educational facilities can cost-effectively use SignalVu-PC in

teaching environments. The specially priced education version includes all

available analysis standard and provides results watermarked 'Education

Version'.

Measurement functions

Spectrum analyzer measurements

(base software)

Channel power, Adjacent channel

power, Multicarrier adjacent channel

Power/Leakage ratio, Occupied

bandwidth, xdB down, Marker

measurements of power, delta power,

integrated power, power density, dBm/

Hz, and dBc/Hz, Signal strength with

audible feedback.

Time domain and statistical

measurements

(base software)

RF IQ vs time, Amplitude vs time, Power

vs time, Frequency vs time, Phase vs

time, CCDF, Peak-to-Average ratio,

Amplitude, Frequency, and Phase

modulation analysis.

WLAN 802.11a/b/g/j/p measurement

application (SV23)

All of the RF transmitter measurements

as defined in the IEEE standard, and a

wide range of additional scalar

measurements such as Carrier

Frequency error, Symbol Timing error,

Average/peak burst power, IQ Origin

Offset, RMS/Peak EVM, and analysis

displays, such as EVM and Phase/

Magnitude Error vs time/frequency or vs

symbols/ subcarriers, as well as packet

header decoded information and symbol

table.

SV24 requires SV23.

SV25 requires SV24.

WLAN 802.11n measurement

application (SV24)

WLAN 802.11ac measurement

application (SV25)

APCO P25 compliance testing and

analysis application (SV26)

Complete set of push-button

TIA-102 standard-based transmitter

measurements with pass/fail results

including ACPR, transmitter power and

encoder attack times, transmitter

throughput delay, frequency deviation,

modulation fidelity, symbol rate

accuracy, and transient frequency

behavior, as well as HCPM transmitter

logical channel peak ACPR, off slot

power, power envelope, and time

alignment.

Bluetooth Basic LE TX SIG

measurements (SV27)

Presets for transmitter measurements

defined by Bluetooth SIG for Basic Rate

and Bluetooth Low Energy. Results also

include Pass/Fail information.

Application also provides Packet Header

Field Decoding and can automatically

detect the standard including Enhanced

Data Rate.

SignalVu-PC-SVE Vector Signal Analysis Software

8 www.tek.com