Specifications

Performance (typical)

The following is typical performance of SignalVu-PC analyzing acquisitions from any MSO/DPO5000, DPO7000, or DPO/DSA/MSO70000 Series oscilloscopes. Vector

modulation analysis is provided for the MDO4000B spectrum analyzer acquisitions. All other MDO spectrum analysis specifications are available in the MDO4000 Series

datasheet. No published performance is available for MSO/DPO2000, MDO/MSO/DPO3000, and MDO4000 Series oscilloscope acquisitions. Performance for SignalVu-PC

when used with the RSA306, RSA500, or RSA600 USB real time spectrum analyzers are shown respectively in the RSA306, RSA500, and RSA600 datasheets.

Frequency-related

Frequency range

See appropriate oscilloscope data sheet

Initial center frequency setting

accuracy

Equal to time-base accuracy of oscilloscope

Center frequency setting

resolution

0.1 Hz

Frequency offset range

0 Hz to the maximum bandwidth of the oscilloscope

Frequency marker readout

accuracy

±(Reference Frequency Error × Marker Frequency + 0.001 × Span + 2) Hz

Span accuracy

±0.3%

Reference frequency error

Equal to oscilloscope reference frequency accuracy, aging, and drift. Refer to appropriate DPO/DSA/MSO data sheet.

Tuning Tables

Tables that present frequency selection in the form of standards-based channels are available for the following.

Cellular standards families: AMPS, NADC, NMT-450, PDC, GSM, CDMA, CDMA-2000, 1xEV-DO WCDMA, TD-SCDMA, LTE,

WiMax

Unlicensed short range: 802.11a/b/j/g/p/n/ac, Bluetooth

Cordless phone: DECT, PHS

Broadcast: AM, FM, ATSC, DVBT/H, NTSC

Mobile radio, pagers, other: GMRS/FRS, iDEN, FLEX, P25, PWT, SMR, WiMax

3rd order inter-modulation

distortion 1

Center frequency

MSO/DPO5000

DPO7000

DPO/DSA/MSO70000

2 GHz

-38 dBc

-40 dBc

-55 dBc

10 GHz

--

--

-48 dBc

18 GHz

--

--

-50 dBc

Residual responses 2

DPO/DSA/ MSO70000 series

(all spans)

–60 dBm

DPO7000C series (all spans)

–65 dBm

MSO/DPO5000 series (all

spans)

–70 dBm

1

Conditions: Each signal level -5 dBm, reference level 0 dBm, 1 MHz tone separation. Math traces off. DPO7054/7104 and MSO/DPO5034/5054/5104 performance not listed.

2

Conditions: RF input terminated, reference level 0 dBm, measurements made after specified oscilloscope warm-up and SPC calibration. Does not include zero Hz spur.

SignalVu-PC-SVE Vector Signal Analysis Software

10 www.tek.com