Bluetooth Basic LE Tx

Measurements (SV27)

Peak Power, Average Power, Adjacent Channel Power or InBand Emission mask, -20dB Bandwidth, Frequency Error, Modulation

Characteristics including ΔF1avg (11110000), ΔF2avg (10101010), ΔF2 > 115 kHz, ΔF2/ΔF1 ratio, frequency deviation vs. time

with packet and octet level measurement information, Carrier Frequency f0, Frequency Offset (Preamble and Payload), Max

Frequency Offset, Frequency Drift f1-f0, Max Drift Rate fn-f0 and fn-fn-5, Center Frequency Offset Table and Frequency Drift table,

color-coded Symbol table, Packet header decoding information, eye diagram, constellation diagram, editable limits

LTE Downlink RF

measurements (SV28)

Adjacent Channel Leakage Ratio (ACLR), Spectrum Emission Mask (SEM), Channel Power, Occupied Bandwidth, Power vs. Time

displaying Transmitter OFF power for TDD signals and LTE constellation diagram for PSS, SSS with Cell ID, Group ID, Sector ID

and Frequency Error.

RF and spectrum analysis performance

Resolution bandwidth

Resolution bandwidth

(spectrum analysis)

1, 2, 3, 5 sequence, auto-coupled, or user selected (arbitrary)

Resolution bandwidth shape

Approximately Gaussian, shape factor 4.1:1 (60:3 dB) ±10%, typical

Resolution bandwidth

accuracy

±1% (auto-coupled RBW mode)

Alternative resolution

bandwidth types

Kaiser window (RBW), –6 dB Mil, CISPR, Blackman-Harris 4B window, Uniform window (none), flat-top window (CW ampl.),

Hanning window

Video bandwidth

Video bandwidth range

Dependent on oscilloscope record length setting. approximately 500 Hz to 5 MHz

RBW/VBW maximum

10,000:1

RBW/VBW minimum

1:1

Resolution

5% of entered value

Accuracy (typical)

±10%

Time domain bandwidth

(amplitude vs. time display)

Time domain bandwidth range At least 1/2 to 1/10,000 of acquisition bandwidth

Time domain bandwidth shape Approximately Gaussian, shape factor 4.1:1(60:3 dB), ±10% typical

Shape factor <2.5:1 (60:3 dB) typical for all bandwidths

Time domain bandwidth

accuracy

±10%

Spectrum display traces,

detectors, and functions

Traces

Three traces + 1 math trace + 1 trace from spectrogram for spectrum display

Detector

Peak, –peak, average, CISPR peak

Trace functions

Normal, Average, Max Hold, Min Hold

Spectrum trace length

801, 2401, 4001, 8001, or 10401 points

SignalVu-PC-SVE Vector Signal Analysis Software

Performance (typical)

14 www.tek.com