19

bq78350-R1

www.ti.com

SLUSCD0B – AUGUST 2015 – REVISED NOVEMBER 2018

Product Folder Links: bq78350-R1

Submit Documentation Feedback

Copyright © 2015–2018, Texas Instruments Incorporated

In addition to many other options, the number of LEDs used and the percentage at which they can be illuminated

are configurable.

9.2.3.5.2

SMBus Address

Although the SMBus slave address is a configurable value in the bq78350-R1 device, this feature is disabled by

default and the slave address is 0x16. The SMBus Address feature can allow up to nine different addresses

based on external resistor value variation per address.

The default setup of the bq78350-R1 device is generic, but there are many additional features that can be

enabled and configured to support a variety of system requirements. These are detailed in the bq78350-R1

Technical Reference Manual (SLUUBD3).

9.2.4 Application Performance Plots

When the bq78350-R1 device is powered up, there are several signals that are enabled at the same time.

Figure 9 shows the rise time of each of the applicable signals.

Figure 9. VCC, MRST, VEN, and PWRM upon Power Up