数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

UM0231 数据表(PDF) 6 Page - STMicroelectronics

部件名 UM0231
功能描述  User manual AD-ICD in-circuit debugging adapter
PDF  15 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 STMICROELECTRONICS - STMicroelectronics

UM0231 数据表(HTML) 6 Page - STMicroelectronics

Back Button UM0231 Datasheet HTML 2Page - STMicroelectronics UM0231 Datasheet HTML 3Page - STMicroelectronics UM0231 Datasheet HTML 4Page - STMicroelectronics UM0231 Datasheet HTML 5Page - STMicroelectronics UM0231 Datasheet HTML 6Page - STMicroelectronics UM0231 Datasheet HTML 7Page - STMicroelectronics UM0231 Datasheet HTML 8Page - STMicroelectronics UM0231 Datasheet HTML 9Page - STMicroelectronics UM0231 Datasheet HTML 10Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 6 / 15 page
background image
2 Configuring the ICD adapter
AD-ICD
6/15
CLKIN solder point (G2)
Your in-circuit debugging tool can provide the clock signal for initiating in-circuit
communication with the microcontroller on the ICD adapter. To do this, you must complete
the connection with a drop of solder on the CLKIN solder point (G2) shown in
Figure 4.
2.2
Run the application in standalone mode
Once the microcontroller on the ICD adapter has been programmed during an in-circuit
debugging or in-circuit programming session, it can run the application in place of the target
microcontroller without being connected to an in-circuit debugging tool or the host PC.
Although in a 16-pin package, the ST7FLITEUSICD executes the application as a
ST7FLITEUS variant in 8-pin package would.
Figure 4.
CLKIN solder point (G2)
When the solder drop is placed on the
CLKIN solder point (G2), pin PA5 is relayed
to CLKIN on the ICC connector. PA5 is not
available for the application.
When the clock signal is furnished by the in-
circuit debugging tool, use the Option Bytes
Disabled mode to start the in-circuit
debugging session. For further information
about this mode refer to the online help of
your integrated development environment or
debugging software.
Solder point G2
MB509
Figure 5.
RST/PA3 On jumper (TP2)
To run the application in standalone mode,
the RST/PA3 On jumper (TP2) must be fitted
and the
ICD On jumper (TP1) must not be
fitted.
In standalone mode, the RST/PA3 pin can
only be used for reset. PA3 is not available.
TP1 not fitted
for standalone
TP2 fitted for
standalone
MB509



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15


数据表 下载

Go To PDF Page


链接网址



ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   数据表链接    |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com