3 Connecting to the application board

AD-ICD

10/15

3.3

Connection for DFN8 microcontroller package

1.

Solder the DFN8 female connector onto your application board in place of your

microcontroller.

2.

Plug the ICC cable from the in-circuit debugging tool into the 10-pin ICC connector on

the top of the ICD Adapter (MB509).

3.

Plug the 8 pins of the DFN8 Device adapter (DB715) into the 8-pin connector on the

bottom of the ICD Adapter (MB509).

4.

Connect the DFN8 Device adapter (DB715) to the DFN female connector on your

application board using the DFN male-male connector. Because of the position of the

GND pin on these connectors, there is only one way to connect them together (see

detail in

Figure 9).

Figure 9.

DFN8 connection scheme

Pin 1 indicators

ICC cable

Application board

DFN8 Device

Adapter (DB715)

ICD Adapter

(MB509)

10-pin ICC

Connector

GND pin

DFN8 female

connector

DFN8 male-male

connector