FN6295 Rev.8.01

Page 1 of 16

Oct 2, 2023

© 2006-2023 Renesas Electronics

ISL2110, ISL2111

100V, 3A/4A Peak, High Frequency Half-Bridge Drivers

DATASHEET

The ISL2110, ISL2111 are 100V, high frequency, half-bridge

N-Channel power MOSFET driver ICs. They are based on the

popular HIP2100, HIP2101 half-bridge drivers, but offer

several performance improvements. Peak output

pull-up/pull-down current has been increased to 3A/4A, which

significantly reduces switching power losses and eliminates

the need for external totem-pole buffers in many applications.

Also, the low end of the VDD operational supply range has

been extended to 8VDC. The ISL2110 has additional input

hysteresis for superior operation in noisy environments and the

inputs of the ISL2111, like those of the ISL2110, can now

safely swing to the VDD supply rail.

Applications

• Telecom half-bridge DC/DC converters

• Telecom full-bridge DC/DC converters

• Two-switch forward converters

• Active-clamp forward converters

• Class-D audio amplifiers

Features

• Drives N-Channel MOSFET half-bridge

• SOIC, DFN, and TDFN package options

• SOIC, DFN, and TDFN packages compliant with 100V

conductor spacing guidelines per IPC-2221

• Pb-free (RoHS compliant)

• Bootstrap supply max voltage to 114VDC

• On-chip 1W bootstrap diode

• Fast propagation times for multi-MHz circuits

• Drives 1nF load with typical rise/fall times of 9ns/7.5ns

• CMOS compatible input thresholds (ISL2110)

• 3.3V/TTL compatible input thresholds (ISL2111)

• Independent inputs provide flexibility

•No start-up problems

• Outputs unaffected by supply glitches, HS ringing below

ground or HS slewing at high dv/dt

• Low power consumption

• Wide supply voltage range (8V to 14V)

• Supply undervoltage protection

• 1.6W/1W typical output pull-up/pull-down resistance

FIGURE 1. APPLICATION BLOCK DIAGRAM

SECONDARY

CIRCUIT

+100V

CONTROLLER

PWM

LI

HI

HO

LO

VDD

HS

HB

+12V

VSS

REFERENCE

AND

ISOLATION

DRIVE

LO

DRIVE

HI

ISL2110

ISL2111