89

Assembly instructions

Can be used with most the USB3.0 cordset brands : No tools required!

Plug assembly

1. Insert the USB3 cordset into the metallic backshell

2. Insert the retention spacer laterally to the cable (this spacer is soft,

in order to adapt to different shapes of overmolding) and slide the

overmolding of the USB3-A plug into this retention spacer

3. Insert the friction ring laterally to the cable

4. Choose the right coding (2 positions) and insert the USB-A plug into

the protective plug.Note at this step, the main key is used for polar-

ization through the blue seal.

7. Screw the backshell on the plug body. A wrench can be necessary to

fully tighten it, and the connection to the receptacle can help

n

Metallic caps

USBF TVC

2

G

Connector type

6: plug

2: square flange receptacle

7: jam nut eceptacle

Shells material & finish

N: aluminium shell - nickel - ROHS compliant

G: aluminium shell - olive drab cadmium

BZ: marine bronze shell - ROHS compliant

n

Panel gasket for square flange receptacle

Thickness: 0,8 mm [.031]

P/n: JE15

1

2

3

4

5

6

Accessories

IMPORTANT NOTE

The sealing is done by the blue seal.

USB3 cordset usable - Not provided