90

USB3F TV (USB-A)

Transversally sealed receptacles

Data transmission

USB specification 3.0

Data rate: up to 5Gb/s for high speed USB

Applications

n

Embedded computers

n

Data acquisition and transmission in harsh

environment

n

Railways

n

Battelfield communication systems

n

Navy systems

In some applications, a transversal sealing for the receptacle is a « must ».

This will prevent fluids and dust from going through the receptacle when

plug or cap are not mated to the receptacle. The sealed solution (version

"S") has a compound at the rear of the receptacle below. In addition,

the Sealed USB3F TV has been successfully tested in very high vibration

corresponding to airplane applications.

COMPLIANT

ROHS

N & BZ

Main characteristics

n

Sealed against fluids and dusts (IP68)

n

Shock, vibration and traction resistant

n

No cabling operation in field and no tools required

n

Improved EMI protection

n

Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-

decoupling device - Shell size 15

n

2 mechanical coding/polarization possibilities by the user (receptacle insert rota-

tion)

n

USB3F TV plug retention in the receptacle: 100 N in the axis

n

Mating cycles: 500 minimum

Environmental protection

n

Sealing (when mated): IP68 (temporary immersion)

n

Salt spray: 48 h with nickel plating

> 500 h with olive drab cadmium

500 h with marine bronze shell

n

Fire retardant / Low smoke: UL94 V0 and NF F 16 101 & 16 102

n

Vibrations: 10 – 500 Hz, 10 g, 3 axes: no discontinuity > 1micro s

n

Shocks: IK06 ► weight of 250 g drop from 40 cm [15.75 in] onto connectors

(mated pair)

n

Humidity: 21 days, 43°C, 98% humidity

n

Temperature range: - 40°C / +85°C

Series USB3 Field TV

USB3F TV

2

S

A

03

G

STR

Shell type

2S: square flange receptacle

7S: jam nut receptacle

Coding

A or B

USB cable length

03: 0.3 m [11.81 inches]

05: 0.5 m [19.68 inches]

10: 1 m [39.37 inches]

15: 1.5 m [59.05 inches]

Shells material & finish

G: aluminium shell - olive drab cadmium plating

N: aluminium shell - nickel plating - ROHS compliant

Type of cable *

ACROS: high reliability crossed USB3 cable with plug at the end

ASTR: high reliability straight USB3 cable with plug at the end

OPEN: high reliability cable open = no plug at the end

Examples:

- square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 S B 05 N CROS

- jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, olive drab cadmium plating: USB3F TV 7 S A 10 G STR

- jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, olive drab cadmium plating: USB3F TV 7 S B 03 G OPEN

Part number code

NEW

USB3.0

*

IMPORTANT NOTE

• for PC to PC application, use a “CROS” type of cable

• for PC to peripheral application, use a “STR” type of cable

See Configuration use on page 87