93

USB3F TV

Hermetic receptacles

COMPLIANT

ROHS

N & BZ

NEW

Data transmission

USB specification 3.0

Data rate: up to 5Gb/s for high speed USB

Applications

n

Embedded computers

n

Data acquisition and transmission in harsh

environment

n

Railways

n

Battelfield communication systems

n

Navy systems

In some applications, a transversal hermiticity for the receptacle is a « must ».

This will prevent gas from going through the receptacle when plug or cap are

not mated to the receptacle.

The hermetic solution (version "H") has a compound at the rear of the receptacle.

Helium leakage is less than 1.10-6 cm3 per second [0.1 micron cubit ft per hour]

at one bar [15 psi] pressure differential.

Main characteristics

n

Same as the USB3F TV (see page 76)... a complete IP68 sealing of the receptacle

is added (even with no plug or no protective cap mated).

n

Outside dimensions are the same as the standard USB3F TV (USB-A).

n

Vibrations : the compounded version of the USBF TV has been tested in vibration

following the NAS 1599 aeronautic specification (ambient temperature):

5 - 3000 Hz, 20g, 2.5 mm [.1 inch] double amplitude, 3 axes, 12 hours

Note: this specification exceeds MIL-C-26500 requirements.

IMPORTANT NOTE

Due to the compound, the coding of the connector must be done in the factory: use the codes A or B in the part number.

Example: USBF3TV 2H A 2 N 03 A

Series USB3 Field TV

USB3F TV

2

H

A

03

G

STR

Shell type

2H: square flange receptacle

7H: jam nut receptacle

Coding

A or B

USB cable length

03: 0.3 m [11.81 inches]

05: 0.5 m [19.68 inches]

10: 1 m [39.37 inches]

15: 1.5 m [59.05 inches]

Shells material & finish

G: aluminium shell - olive drab cadmium plating

N: aluminium shell - nickel plating - ROHS compliant

Type of cable *

ACROS: high reliability crossed USB3 cable with plug at the end

ASTR: high reliability straight USB3 cable with plug at the end

OPEN: high reliability cable open = no plug at the end

Examples:

- square flange receptacle, with 0.5m length of high reliability USB3 cable crossed, coding B, nickel plating: USB3F TV 2 H B 05 N CROS

- jam nut receptacle, with 1m length of high reliability USB3 cable straight, coding A, ODC plating: USB3F TV 7 H A 10 G STR

- jam nut receptacle, with 0.3m length of high reliability USB3 cable open, coding B, ODC plating: USB3F TV 7 H B 03 G OPEN

Part number code

Same for jam nut receptacle.

*

IMPORTANT NOTE

• for PC to PC application, use a “CROS” type of cable

• for PC to peripheral application, use a “STR” type of cable

See Configuration use on page 87

Coding A

Coding B

A coding

B coding

Main key

Main key