LP5030 datasheet(13/62 Pages) TI2

13 / 62 page

OUT0

8 Bits Color

8 Bits Brightness

Color-Mixing

Brightness-Control

12 Bits / 29KHz PWM

PWM Generators

OUT1

OUT2

OUT33

OUT34

OUT35

LP5030, LP5036

www.ti.com

SLVSEH1B – SEPTEMBER 2018 – REVISED JANUARY 2019

Product Folder Links: LP5030 LP5036

Submit Documentation Feedback

Feature Description (continued)

Figure 9. PWM Control Scheme for Each Channel

8.3.1.1 Independent Color Mixing Per RGB LED Module

Each output channel has its own individual 8-bit color-setting register (OUTx_COLOR). The device allows every

RGB LED module to achieve >16 million (256 × 256 × 256) color-mixing.

8.3.1.2 Independent Intensity Control Per RGB LED Module

When color is fixed, the independent intensity-control is used to achieve accurate and flexible dimming control for

every RGB LED module.

8.3.1.2.1

Intensity-Control Register Configuration

Every

three

consecutive

output

channels

are

assigned

their

respective

intensity-control

(LEDx_BRIGHTNESS). For example, OUT0, OUT1, and OUT2 are assigned to LED0_BRIGHTNESS, so it is

recommended to connect the RGB LEDs in the sequence as shown in Table 1. The LP503x device allows 256-

step intensity control for each RGB LED module, which helps achieve a smooth dimming effect.

Keeping FFh (default value) in the LED0_BRIGHTNESS register results in 100% dimming duty cycle. With this

setting, the users can just configure the color mixing register by channel to achieve the target dimming effect in a

single-color LED application.

8.3.1.2.2

Logarithmic- or Linear-Scale Intensity Control

For human-eye-friendly visual performance, a logarithmic-scale dimming curve is usually implemented in LED

drivers. However, for RGB LEDs, if using a single register to achieve both color mixing and intensity control,

color distortion can be observed easily when using a logarithmic scale. The LP503x device, with independent

color-mixing and intensity-control registers, implements the logarithmic scale dimming control inside the intensity

control function, which solves the color distortion issue effectively. See Figure 10. Also, the LP503x device allows

users to configure the dimming scale either logarithmically or linearly through the global Log_Scale_EN register

bit. If a special dimming curve is desired, using the linear scale with software correction is the most flexible

approach. See Figure 11.

LP5030 数据表(PDF) 13 Page - Texas Instruments

LP5030 数据表(HTML) 13 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

数据表下载