UCD3138RJAR datasheet(40/99 Pages) TI2

40 / 99 page

FAULT - CBC

FAULT - AB

FAULT -A

DCOMP – 4X

EXT GPIO– 4X

ACOMP – 7X

FAULT -B

FAULT MODULE

CYCLE BY CYCLE

AB FLAG

A FLAG

B FLAG

FAULT MUX

ALL_FAULT_EN

DPWM _EN

DPWM

CBC_FAULT_EN

CBC_PWM _AB_EN

FAULT MODULE

ANALOG PCM

Bit 20 in DPWMCTRL0

Bit30 in DPWMFLTCTRL

Bit 31 in DPWMFLTCTRL

Bit 0 in DPWMCTRL0

DISABLE PWM A AND B

DISABLE PWM A ONLY

DISABLE PWM B ONLY

The Fault Mux Module provides a multitude of fault protection functions within the UCD3138 high-speed loop

(front end control, filter, DPWM and loop Mux modules). The Fault Mux Module allows highly configurable fault

generation based on digital comparators, high-speed analog comparators and external fault pins. Each of the

fault inputs to the DPWM modules can be configured to one or any combination of the fault events provided in

the Fault Mux Module.

Each one of the DPWM engines has four fault modules. The modules are called CBC fault module, AB fault

module, A fault module and B fault module.

The internal circuitry in all the four fault modules is identical, and the difference between the modules is limited to

the way the modules are attached to the DPWMs.

UCD3138

SLUSAP2J – MARCH 2012 – REVISED NOVEMBER 2021

www.ti.com

Submit Document Feedback

Product Folder Links: UCD3138

UCD3138RJAR 数据表(PDF) 40 Page - Texas Instruments

UCD3138RJAR 数据表(HTML) 40 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

数据表下载