UCD3138RJAR datasheet(48/99 Pages) TI2

48 / 99 page

EXT CAP

AD02

400 Ω

Digital

RSHARE

250 Ω

3.3 V

ISHARE

ADC12 and

CMP

ESD

250 Ω

3. 2 kΩ

ESD

AD13

3.3V

SW2

SW1

SW3

3.3 V

ADC12 and

CMP

Figure 9-16. Simplified Current Sharing Circuitry

CURRENT SHARING MODE

FOR TEST ONLY,

ALWAYS KEEP 00

CS_MODE

EN_SW1

EN_SW2

DPWM

Off or Slave Mode (3-state)

00 (default)

PWM Bus

ACTIVE

Off or Slave Mode (3-state)

Analog Bus or Master

The period and the duty of 8-bit PWM current source and the state of the SW1 and SW2 switches can be

controlled through the current sharing control register (CSCTRL).

9.5.13 Temperature Reference

The temperature reference register (TEMPREF) provides the ADC12 count when ADC12 measures the internal

temperature sensor (channel 14) during the factory trim and calibration.

This information can be used by different periodic temperature compensation routines implemented in the

firmware. But it should not be overwritten by firmware, otherwise this factory written value will be lost.

UCD3138

SLUSAP2J – MARCH 2012 – REVISED NOVEMBER 2021

www.ti.com

Submit Document Feedback

Product Folder Links: UCD3138

UCD3138RJAR 数据表(PDF) 48 Page - Texas Instruments

UCD3138RJAR 数据表(HTML) 48 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99

数据表下载