25

TLV170, TLV2170, TLV4170

www.ti.com

SBOS782A – NOVEMBER 2016 – REVISED MAY 2018

Product Folder Links: TLV170 TLV2170 TLV4170

Submit Documentation Feedback

Copyright © 2016–2018, Texas Instruments Incorporated

11 Device and Documentation Support

11.1 Device Support

11.1.1 Development Support

11.1.1.1 TINA-TI™ (Free Software Download)

TINA-TI™ is a simple, powerful, and easy-to-use circuit simulation program based on a SPICE engine. TINA-

TI™ is a free, fully-functional version of the TINA-TI™ software, preloaded with a library of macromodels in

addition to a range of both passive and active models. TINA-TI™ provides all the conventional dc, transient, and

frequency domain analysis of SPICE, as well as additional design capabilities.

Available as a free download from the Analog eLab Design Center, TINA-TI™ offers extensive post-processing

capability that allows users to format results in a variety of ways. Virtual instruments offer the ability to select

input waveforms and probe circuit nodes, voltages, and waveforms, creating a dynamic quick-start tool.

NOTE

These files require that either the TINA software (from DesignSoft™) or the TINA-TI™

software be installed. Download the free TINA-TI™ software from the TINA-TI™ folder.

11.1.1.2 DIP Adapter EVM

The DIP Adapter EVM tool provides an easy, low-cost way to prototype small surface-mount devices. The

evaluation tool uses these TI packages: D or U (SOIC-8), PW (TSSOP-8), DGK (VSSOP-8), DBV (SOT23-6,

SOT23-5, and SOT23-3), DCK (SC70-6 and SC70-5), and DRL (SOT563-6). The DIP adapter EVM can also be

used with terminal strips or can be wired directly to existing circuits.

11.1.1.3 Universal Op Amp EVM

The Universal Op Amp EVM is a series of general-purpose, blank circuit boards that simplify prototyping circuits

for a variety of device package types. The evaluation module board design allows many different circuits to be

constructed easily and quickly. Five models are offered, with each model intended for a specific package type.

PDIP, SOIC, VSSOP, TSSOP, and SOT23 packages are all supported.

NOTE

These boards are unpopulated, so users must provide their own devices. TI recommends

requesting several op amp device samples when ordering the universal op amp EVM.

11.1.1.4 TI Precision Designs

TI precision designs are analog solutions created by TI’s precision analog applications experts and offer the

theory of operation, component selection, simulation, a complete PCB schematic and layout, bill of materials, and

measured

performance

of

many

useful

circuits.

TI

precision

designs

are

available

online

at

www.ti.com/ww/en/analog/precision-designs/.

11.1.1.5 WEBENCH® Filter Designer

The WEBENCH® Filter Designer is a simple, powerful, and easy-to-use active filter design program. The

WEBENCH® Filter Designer lets you create optimized filter designs using a selection of TI op amps and passive

components from TI's vendor partners.

Available as a web-based tool from the WEBENCH® design center, the WEBENCH® filter designer allows

complete multistage active filter solutions to be designed, optimized, and simulated within minutes.