 2007-2022 Microchip Technology Inc. and its subsidiaries

DS20001210Q-page 3

24AA024/24LC024/24AA025/24LC025

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings(†)

VCC.............................................................................................................................................................................6.5V

All inputs and outputs w.r.t. VSS ..........................................................................................................-0.3V to VCC +1.0V

Storage temperature ...............................................................................................................................-65°C to +150°C

Ambient temperature with power applied................................................................................................-40°C to +125°C

ESD protection on all pins

 4kV

TABLE 1-1:

DC CHARACTERISTICS

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above those

indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for

extended periods may affect device reliability.

DC CHARACTERISTICS

Industrial (I): TA = -40°C to +85°C, VCC = +1.7V to +5.5V

Extended (E): TA = -40°C to +125°C, VCC = +2.5V to +5.5V

Param.

No.

Symbol

Characteristic

Min.

Max.

Units

Conditions

D1

VIH

High-level Input Voltage

0.7VCC

—V

D2

VIL

Low-level Input Voltage

—

0.3VCC

V0.2VCC for VCC <2.5V

D3

VHYS

Hysteresis of Schmitt

Trigger Inputs

0.05VCC

—V

(Note)

D4

VOL

Low-level Output Voltage

—

0.40

V

IOL = 3.0 mA, VCC =2.5V

D5

ILI

Input Leakage Current

—

±1

µA

VIN =VSS or VCC

D6

ILO

Output Leakage Current

—

±1

µA

VOUT =VSS or VCC

D7

CIN,

COUT

Pin Capacitance

(all inputs/outputs)

—10

pF

VCC =5.5V (Note)

TA = 25°C, FCLK =1MHz

D8

ICCWRITE

Operating Current

—3

mA

VCC = 5.5V, SCL = 400 kHz

D9

ICCREAD

—1

mA

D10

ICCS

Standby Current

—1

µA

SDA = SCL = VCC

A0, A1, A2, WP = VSS, I-Temp

—5

µA

SDA = SCL = VCC

A0, A1, A2, WP = VSS, E-Temp

Note:

This parameter is periodically sampled and not 100% tested.