ADMV1455BBCZ-R7 datasheet(19/141 Pages) AD

19 / 141 page

Data Sheet

ADMV1455

TYPICAL PERFORMANCE CHARACTERISTICS

analog.com

Rev. 0 | 19 of 141

IF MODE, RF_IN, HIGH BAND

All measurements use RF_IN as an input and IF as an output, with the RF high-band settings. The supply voltage = 1.8V (all supplies) and TC =

25°C, unless otherwise noted.

All measurements taken with PRF = −45dBm, PLO = −5dBm, fRF = 49GHz, fIF = 8GHz, fLO = 41GHz (upper sideband), maximum gain, RF LPF

setting = 0x00 (highest cutoff), RF HPF setting = 0x3F (lowest cutoff), IF band-pass filter (BPF) settings = 8GHz (see Table 24), and LO tunable

filter wideband high settings (see Table 22), unless otherwise noted. Trace and connector losses are de-embeded to the RF pins (see the RF

and IF input and output pins in Figure 3).

Conversion Gain

Figure 4. Conversion Gain vs. RF Input Frequency at Various Temperatures

Figure 5. Conversion Gain vs. RF Input Frequency at Various Temperatures,

Minimum Gain

Figure 6. Conversion Gain vs. RF Input Frequency at Various Temperatures,

LO Filter Wideband Low Setting

Figure 7. Conversion Gain vs. RF Input Frequency at Various Temperatures,

LO Filter Wideband Low Setting, Minimum Gain

ADMV1455BBCZ-R7 数据表(PDF) 19 Page - Analog Devices