DA9213 datasheet(21/62 Pages) RENESAS

21 / 62 page

DA9213, DA9214, DA9215 Datasheet

R16DS0598EJ0361 Rev.03.61

Nov 03, 2025

CFR0011-120-00

Page 21

Functional Description

Flexible configurability and the availability of different control schemes make both DA9213, DA9214, and D

A9215 the ideal single/dual buck companion ICs to expand the existing capabilities of a master PMIC.

Due to the advanced compatibility between both DA9213, DA9214, and DA9215 and the DA9063, they offer

several advantages when they are operated together. These advantages include:

▪ DA9213, DA9214, and DA9215 can be enabled and controlled by DA9063 during the power up sequence,

thanks to DA9063’s dedicated output signals during power up, and compatible input controls in both DA9213,

DA9214, and DA9215.

▪ DA9213, DA9214, and DA9215 can be used in a completely transparent way for the host processor and can

share the same Control Interface (same SPI chip select or I2C address), thanks to the compatible registers

map. DA9213, DA9214, and DA9215 have a dedicated register space for configuration and control which

does not conflict with DA9063.

▪ DA9213, DA9214, and DA9215 support a power good configurable port for enhanced communication to the

host processor and improved power up sequencing.

▪ DA9213, DA9214, and DA9215 can share the same interrupt line with DA9063.

In addition, the 2-WIRE / 4-WIRE interfaces allow DA9213, DA9214, and DA9215 to fit many standard PMU

parts and power applications.

Figure 14. Interface of DA9213/14/15 with DA9063 and the Host Processor

As shown in Figure 14, a typical application case includes a host processor, a Main PMIC (for example, DA9063)

and DA9213, DA9214, and DA9215 used as companion IC for the high-power core supply.

The easiest way of controlling DA9213, DA9214, and DA9215 is through the Control Interface. The master

initiating the communication must always be the host processor that reads and writes to the main PMIC, and to

the DA9213, DA9214, and DA9215 registers. To poll the status of DA9213 or DA9214, the host processor must

access the dedicated register area through the Control Interface. DA9213, DA9214, and DA9215 can be

additionally controlled by means of hardware inputs.

DA9063

Host

Processor

nIRQ

nONKEY

nRESET

Vdd

VCharger

nSHUTDOWN

GPIOs

OUT_32K

Control IF

DA9213/

14/15

Control IF

GPIO9

nIRQ

PWR1_EN

nOFF

LID

GPI0 (enable)

IC_EN

PWR_EN

SYS_EN

GPI1 (voltage set)

DA9213 数据表(PDF) 21 Page - Renesas Technology Corp

DA9213 数据表(HTML) 21 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

数据表下载