WILCS02 datasheet(63/71 Pages) MICROCHIP

63 / 71 page

WILCS02IC and WILCS02 Family

Appendix A: Regulatory Approval

Data Sheet

DS70005557C - 63

Table 5-1. European Compliance Information

Certification

Standard

Article

Safety

EN 62368

3.1a

Health

EN 62311

EMC

EN 301 489-1

3.1b

EN 301 489-17

Radio

EN 300 328

3.2

The ETSI provides guidance on modular devices in the “Guide to the application of harmonised

standards covering articles 3.1b and 3.2 of the RED 2014/53/EU (RED) to multi-radio and

combined radio and non-radio equipment” document available at http://www.etsi.org/deliver/etsi_eg/

203300_203399/20 3367/01.01.01_60/eg_203367v010101p.pdf.

Note: To maintain conformance to the standards listed in the preceding European Compliance

table, the module shall be installed in accordance with the installation instructions in this data

sheet and shall not be modified. When integrating a radio module into a completed product,

the integrator becomes the manufacturer of the final product and is therefore responsible for

demonstrating compliance of the final product with the essential requirements against the RED.

5.3.1

Labeling and User Information Requirements

The label on the final product that contains the WILCS02PE/WILCS02UE modules must follow CE

marking requirements.

5.3.2

Conformity Assessment

From ETSI Guidance Note EG 203367, section 6.1, when non-radio products are combined with a

radio product:

If the manufacturer of the combined equipment installs the radio product in a host non-radio

product in equivalent assessment conditions (i.e. host equivalent to the one used for the

assessment of the radio product) and according to the installation instructions for the radio product,

then no additional assessment of the combined equipment against article 3.2 of the RED is required.

5.3.2.1 Simplified EU Declaration of Conformity

Hereby, Microchip Technology Inc. declares that the radio equipment type WILCS02PE/WILCS02UE

modules are in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity, for this product, is available at www.microchip.com/

design-centers/wireless-connectivity/.

5.3.3

Approved Antenna Types

For the WILCS02PE, approval was received using the integral PCB antenna.

For the WILCS02UE, approved antennas are listed in the WILCS02 Module Approved External

Antenna.

5.3.4

Helpful Websites

A document that can be used as a starting point in understanding the use of Short Range

Devices (SRD) in Europe is the European Radio Communications Committee (ERC) Recommendation

70-03 E, which can be downloaded from the European Communications Committee (ECC) at:

docdb.cept.org/.

Additional helpful web sites are:

• Radio Equipment Directive (2014/53/EU):

https://ec.europa.eu/growth/single-market/european-standards/harmonised-standards/red_en

• European Conference of Postal and Telecommunications Administrations (CEPT):

WILCS02 数据表(PDF) 63 Page - Microchip Technology

WILCS02 数据表(HTML) 63 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载