| 数据搜索系统,热门电子元器件搜索 |
|
STR710FZ1 数据表(PDF) 35 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STR710FZ1 数据表(HTML) 35 Page - STMicroelectronics |
|
35 / 78 page ![]() STR71xF Electrical parameters 35/78 Notes: 1. IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN>V33 while a negative injection is induced by VIN<VSS. For true open-drain pads, there is no positive injection current, and the corresponding VIN maximum must always be respected. Data based on TA = 25 °C. 2. All 3.3V power (V33, AVDD, V33IO-PLL) and ground (VSS, AVSS, VSSIO-PLL) pins must always be connected to the external 3.3V supply. 3. Negative injection disturbs the analog performance of the device. See note in Section 4.3.11: ADC characteristics on page 66. 4. When several inputs are submitted to a current injection, the maximum ΣIINJ(PIN) is the absolute sum of the positive and negative injected currents (instantaneous values). These results are based on characterization with ΣI INJ(PIN) maximum current injection on four I/O port pins of the device. 5. Only when using external 1.8V power supply. All the power (V18, V18BKP) and ground (VSS18, VSSBKP) pins must always be connected to the external 1.8V supply. Table 11. Current characteristics Symbol Ratings Max. Unit IV33 Total current into V33/V33IO-PLL power lines (source) 2) 150 mA IVSS Total current out of VSS/VSSIO-PLL ground lines (sink) 2) 150 IIO Output current sunk by any I/O and control pin 25 Output current source by any I/Os and control pin - 25 IINJ(PIN) 1) 3) Injected current on RSTIN pin ± 5 Injected current on CK pin ± 5 Injected current on any other pin 4) ± 5 ΣIINJ(PIN) 1) Total injected current (sum of all I/O and control pins) 4) ± 25 Table 12. Thermal characteristics Symbol Ratings Value Unit TSTG Storage temperature range -65 to +150 °C TJ Maximum junction temperature (see Section 5.2: Thermal characteristics on page 72) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |