Data sheet | Redundancy unit CP-C.1-A-RU - 3

Mounting and demounting

Mounting position and dimensions

The devices have to be mounted horizontally with the input

terminals on the top.

Installation

56.4 2.22"

INPUT 1

INPUT 2

++

--

OUTPUT

++

-

-

CP-C.1-A-RU

126.8 4.99"

136.0 5.35"

129.8 5.11"

in mm [inches]

Electrical connection - Input side [INPUT 1 + - / INPUT 2 + -]

Connect the input terminals, stripping length of the cable –

see technical data. For channel 1 left-hand input terminals +

-, for channel 2 right-hand input terminals + -.

Electrical connection - Output side [OUTPUT + - + -]

Rate the lines for the maximum output current or provide a

separate fuse protection. We recommend to choose the cable

cross section as large as possible in order to minimize voltage

drops. Observe the polarity.

Connection diagram

INPUT 1 +, -

Connection of the output of power supply unit 1

INPUT 2 +, -

Connection of the output of power supply unit 2

OUTPUT ++, --

Output for load

A

B

A

B

(A) ≥ 50 mm

(1.97 in)

(B) ≥ 50 mm

(1.97 in)