| 数据搜索系统,热门电子元器件搜索 |
|
CHR71000 数据表(PDF) 31 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
CHR71000 数据表(HTML) 31 Page - ams-OSRAM AG |
|
31 / 54 page ![]() CHR71000 Functional description Datasheet • PUBLIC • Document Feedback DS000427 • v2-01 • 2026-Mar-18 31 / 54 / The length of the ROT is (T1+T2+T3+2*(T4+T5+T6+T8)+T9+T10+T11+T12+T13+4). With the default values, the ROT length is 168 clock cycles, or 5.56 µs. The read out will start after this ROT (4 clock pulses after sync_x rising edge). The ROT timing can be configured further with the following registers: • With the register reg_pol, the polarity of all outputs can be set. To achieve the timing as in previous figure, the reg_pol bit for every signal should be '1'. The signal can be inverted by changing the register bit to '0'. Next table shows which register bit maps to which signal. Table 10: Reg_pol description Reg_pol Output [0] imc_sync_x [1] imc_clk_y [2] imc_sync_y_read [3] imc_sync_y_inte [4] imc_pix_transfer [5] imc_pix_reset [6] imc_pix_select [7] imc_col_sample [8] imc_col_sample_r [9] imc_col_sample_s [10] imc_col_init [11] imc_col_precharge [12] imc_col_enable |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |