| 数据搜索系统,热门电子元器件搜索 |
|
CHR71000 数据表(PDF) 40 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
CHR71000 数据表(HTML) 40 Page - ams-OSRAM AG |
|
40 / 54 page ![]() CHR71000 Functional description Datasheet • PUBLIC • Document Feedback DS000427 • v2-01 • 2026-Mar-18 40 / 54 / 7.6.3 Output gain and offset The gain of the on-chip output amplifier is selectable through the SPI resister settings. The gain varies linearly between 1 and 3.5 in 16 steps (4 bits). Up to gain setting 8, the gain increases by approximately 10-12 % for successive settings. From setting 9 onwards, the gain increases by about 20-22 % for successive settings. Figure 22 shows the gain values for the different gain register settings. Besides the gain, also the offset level of each channel can be programmed. This allows balancing the random offsets of the different internal channels. Internally, the CHR71000 uses 16 analog channels (multiplexed to 8 outputs). That is why 16 offset registers are programmable over SPI (registers 64 – 87). The output buffer has been designed to nominally drive a 20 pF capacitive load at nominal 30 Mpixels/s readout rate (per output). The polarity of the output signal is positive video (dark pixel signals low, bright pixel signals high). So, the analog output swing depends on the gain and offset settings. You can see the different levels and swing in Figure 23. Figure 22: PGA setting vs. actual PGA gain |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |