LIS331DL datasheet(33/42 Pages) STMICROELECTRONICS

33 / 42 page

LIS331DL

33/42

7.15

FF_WU_SRC_2 (35h)

Free-fall and wake-up source register. Read only register.

Reading at this address clears FF_WU_SRC_2 register and the FF_WU_2 interrupt and

allows the refreshment of data in the FF_WU_SRC_2 register if the latched option was

chosen.

7.16

FF_WU_THS_2 (36h)

Most significant bit (DCRM) is used to select the resetting mode of the duration counter. If

DCRM=0 counter is reset when the interrupt is no more active else if DCRM=1 duration

counter is decremented.

Table 40.

FF_WU_SRC_2 register

Table 41.

FF_WU_SRC_2 description

Interrupt Active. Default value: 0

(0: no interrupt has been generated;

1: one or more interrupt events have been generated)

Z High. Default value: 0

(0: no interrupt; 1: Z High event has occurred)

Z Low. Default value: 0

(0: no interrupt; 1: Z Low event has occurred)

Y High. Default value: 0

(0: no interrupt; 1: Y High event has occurred)

Y Low. Default value: 0

(0: no interrupt; 1: Y Low event has occurred)

X High. Default value: 0

(0: no interrupt; 1: X High event has occurred)

X Low. Default value: 0

(0: no interrupt; 1: X Low event has occurred)

Table 42.

FF_WU_THS_2 register

DCRM

THS6

THS5

THS4

THS3

THS2

THS1

THS0

Table 43.

FF_WU_THS_2 description

DCRM

Resetting mode selection. Default value: 0

(0: counter reset; 1: counter decremented)

THS6, THS0

Free-fall / wake-up Threshold. Default value: 000 0000

LIS331DL 数据表(PDF) 33 Page - STMicroelectronics

LIS331DL 数据表(HTML) 33 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

数据表下载