ADE3800 datasheet(92/138 Pages) STMICROELECTRONICS

92 / 138 page

ADE3800

92/138

4.16 Adaptive Phase Control (APC)

The APC block generates a 2-bit dither pattern for an 8-bit panel or a 4-bit dither pattern for a 6-bit

panel to visually improve the amplitude resolution of the 10-bit RGB output signal.

4.16.1 Function

The heart of the APC block consists of a 32x32x4 bit lookup table (LUT). It represents one threshold

matrix, which can be read using a programmable addressing technique as well as a programmable

dither threshold control. The panel depth APC_CTRL0[1] should match the bit depth of the panel

and is not masked by APC enable APC_CTRL0[0]. When APC_CTRL0[0] is cleared, the dither

pattern is set to zero.

4.16.2 Addressing Technique

The APC block offers an I2C programmable addressing technique to generate various temporal

dither patterns. The frame offset APC_CTRL1[7:4] is a 4-bit increment value, which defines the

horizontal/vertical displacement of the dither matrix from frame to frame. After the frame length

APC_CTRL1[3:0] + 1 number of frames, both horizontal and vertical displacement positions will be

reset to zero, only when the frame length APC_CTRL1[3:0] > 0.

Note:

To set the frame accumulator to zero, the frame offset APC_CTRL1[7:4] must be programmed to 0,

and the frame length APC_CTRL1[3:0] to 1.

The frame offset can be independently activated in the horizontal and vertical dimension using

respectively APC_CTRL0[5] and APC_CTRL0[6]. In addition, APC_CTRL0[7] enables a horizontal

displacement increment of the frame offset APC_CTRL1[7:4] per color component.

4.16.3 Dither threshold Control

When the panel depth APC_CTRL0[1] is set to 0, the 4-bit LUT output value maps to a 2-bit value

for 8-bit panels.

HBLOCK_SIZE

0CA2

R/W

[3:0]

Size in bits of horizontal window = 2 ^ (3+ hblock_size)

FRAME_CNT_MAX

0CA3

R/W

[7:0]

-Number of frames to complete one measurement

-Total number of pixs in a line would be:

frame_cnt_max * (2 ^ (3+ hblock_size) )

-example: hblock_size = 0; frame_cnt_max = 8;

means that it will take 8 frames to finish the calculation. For

each frame only one portion of the image is being calculated

on. The size of that portion is 2 ^ (3 + hblock_size), in this

case 8 pixels. This means that the calculated line length = 8

pix window * 8 frames = 64 pixels

WF_SHIFT

0CA4

R/W

[2:0]

Selector of which 4 of the Walsh function is measuring

FLICKER_MEAS0

0CB1 – B4

R/W

[31:0]

Score reg showing pattern matching pattern 0

FLICKER_MEAS1

0CB5 – B8

R/W

[31:0]

Score reg showing pattern matching pattern 1

FLICKER_MEAS2

0CB9 – BC

R/W

[31:0]

Score reg showing pattern matching pattern 2

FLICKER_MEAS3

0CBD – C0

R/W

[31:0]

Score reg showing pattern matching pattern 3

Table 31: FLK Registers (Sheet 2 of 2)

ADE3800 数据表(PDF) 92 Page - STMicroelectronics

ADE3800 数据表(HTML) 92 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

ADE3800 数据表(PDF) 92 Page - STMicroelectronics

ADE3800 数据表(HTML) 92 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载