TDF8599 datasheet(13/52 Pages) NXP

部件名	TDF8599

功能描述	I2C-bus controlled dual channel 43 W/2 W single channel 85 W/1 W class-D power amplifier with load diagnostics

PDF	52 Pages

Scroll/Zoom	100%

制造商	NXP [NXP Semiconductors]

网页	http://www.nxp.com

标志

13 / 52 page

TDF8599_1

Product data sheet

Rev. 01 — 13 November 2008

13 of 52

NXP Semiconductors

TDF8599

Class-D power ampliﬁer with load diagnostics

8.4.2 Phase staggering (Slave mode)

In Slave mode with phase lock operation enabled, a phase shift with respect to the

incoming clock signal can be selected to distribute the switching moments over time. In

non-I2C-bus mode, 1

⁄

2 π phase shift can be programmed using pin MOD. In I

2C-bus mode,

ﬁve different phase shifts (1

⁄

4 π,

⁄

3 π,

⁄

2 π,

⁄

3 π,

⁄

4 π) can be selected using the I

2C-bus

bits (IB3[D1:D3]). See Figure 9 for selection of the phase shift in non-I2C-bus mode with

pin MOD. An additional capacitor must be connected to pin SSM when 1

⁄

4 π phase shift is

used (see Figure 9). An example of using 1

⁄

2 π phase shift for BD modulation is shown in

Figure 13.

a. Bridge half 1.

b. Bridge half 2 switched in the opposite phase to bridge half 1.

Fig 11. AD modulation

a. Phase switching cycle.

b. Inverted signal to the modulator.

Fig 12. BD modulation

001aai779

INxP

OUTxP

001aai780

INxN

OUTxN

001aai781

INxP

OUTxP

OUTxP, OUTxN

001aai782

INxN

OUTxN

TDF8599 数据表(PDF) 13 Page - NXP Semiconductors

TDF8599 数据表(HTML) 13 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表下载