CS2200-OTP

DS842F1

13

5.4

PLL Clock Output

The PLL clock output pin (CLK_OUT) provides a buffered version of the output of the frequency synthesizer.

The driver can be set to high-impedance with the M2 pin when the M2Config[1:0] global parameter is set to

either 000 or 010. The output from the PLL automatically drives a static low condition while the PLL is un-

locked (when the clock may be unreliable). This feature can be disabled by setting the ClkOutUnl global

parameter, however the state CLK_OUT may then be unreliable during an unlock condition.

Figure 7. PLL Clock Output Options

Referenced Control

Parameter Definition

ClkOutUnl.............................. “Enable PLL Clock Output on Unlock (ClkOutUnl)” on page 19

ClkOutDis .............................. “M2 Configured as Output Disable” on page 15

M2Config[2:0]........................“M2 Pin Configuration (M2Config[2:0])” on page 19

PLL Locked/Unlocked

PLL Output

2:1 Mux

M2 pin with

M2Config[1:0] = 000, 010

2:1 Mux

ClkOutUnl

0

PLL Clock Output Pin

(CLK_OUT)

0

1

0

1

PLL Clock Output

PLLClkOut