| 数据搜索系统,热门电子元器件搜索 |
|
MPC8533VTARJB 数据表(PDF) 94 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8533VTARJB 数据表(HTML) 94 Page - Freescale Semiconductor, Inc |
|
94 / 116 page ![]() MPC8533E PowerQUICC™ III Integrated Processor Hardware Specifications, Rev. 3 94 Freescale Semiconductor Thermal Table 66 provides the thermal resistance with heat sink in open flow. Simulations with heat sinks were done with the package mounted on the 2s2p thermal test board. The thermal interface material was a typical thermal grease such as Dow Corning 340 or Wakefield 120 grease. For system thermal modeling, the MPC8533E thermal model without a lid is shown in Figure 56. The substrate is modeled as a block 29 × 29 × 1.18 mm with an in-plane conductivity of 18.0 W/m•K and a through-plane conductivity of 1.0 W/m•K. The solder balls and air are modeled as a single block 29 × 29 × 0.58 mm with an in-plane conductivity of 0.034 W/m•K and a through plane conductivity of 12.1 W/m•K. The die is modeled as 7.6 × 8.4 mm with a thickness of 0.75 mm. The bump/underfill layer is modeled as a collapsed thermal resistance between the die and substrate assuming a conductivity of 6.5 W/m•K in the thickness dimension of 0.07 mm. The die is centered on the substrate. The thermal model uses approximate dimensions to reduce grid. Please refer to Figure 55 for actual dimensions. 20.2 Recommended Thermal Model Table 67 shows the MPC8533E thermal model. Table 66. Thermal Resistance with Heat Sink in Open Flow Heat Sink with Thermal Grease Air Flow Thermal Resistance ( °C/W) Wakefield 53 × 53 × 25 mm pin fin Natural convection 6.1 Wakefield 53 × 53 × 25 mm pin fin 1 m/s 3.0 Aavid 35 × 31 × 23 mm pin fin Natural convection 8.1 Aavid 35 × 31 × 23 mm pin fin 1 m/s 4.3 Aavid 30 × 30 × 9.4 mm pin fin Natural convection 11.6 Aavid 30 × 30 × 9.4 mm pin fin 1 m/s 6.7 Aavid 43 × 41 × 16.5 mm pin fin Natural convection 8.3 Aavid 43 × 41 × 16.5 mm pin fin 1 m/s 4.3 Table 67. MPC8533EThermal Model Conductivity Value Units Die (7.6 × 8.4 × 0.75mm) Silicon Temperature dependent — Bump/Underfill (7.6 × 8.4 × 0.070 mm) Collapsed Thermal Resistance Kz 6.5 W/m•K Substrate (29 × 29 × 1.18 mm) Kx 18 W/m•K Ky 18 Kz 1.0 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |