www.austriamicrosystems.com/AS5145

Revision 1.10

5 - 36

AS5145

Data Sheet - P i n A s s i g n m e n t s

Pin 1 and 2 are the magnetic field change indicators, MagINCn and MagDECn (magnetic field strength increase or decrease through variation of

the distance between the magnet and the device). These outputs can be used to detect the valid magnetic field range. Furthermore those

indicators can also be used for contact-less push-button functionality.

Pin 3 and 4 are multi function pins for sync mode, sin/cosine mode and incremental mode.

Pin 6 Mode_Index allows switching between filtered (slow) and unfiltered (fast mode). In incremental mode, the pin changes from input to output

and provides the index pulse information. A change of the Mode during operation is not allowed. The setup must be constant during power up

and during operation.

Pins 7, 15, and 16 are supply pins, pins 5, 13, and 14 are for internal use and must not be connected.

Pin 8 (PDIO) is used to program the zero-position into the OTP(see page 19). This pin is also used as digital input to shift serial data through the

device in Daisy Chain configuration, (see page 14).

Pin 11 Chip Select (CSn; active low) selects a device within a network of AS5145 encoders and initiates serial data transfer. A logic high at CSn

puts the data output pin (DO) to tri-state and terminates serial data transfer. This pin is also used for alignment mode (see Alignment Mode on

page 23) and programming mode (see Programming the AS5145 on page 19).

Pin 12 allows a single wire output of the 12-bit absolute position value. The value is encoded into a pulse width modulated signal with 1µs pulse

width per step (1µs to 4096µs over a full turn). By using an external low pass filter, the digital PWM signal is converted into an analog voltage,

e.g. for making a direct replacement of potentiometers possible.

14

NC

Must be left unconnected

15

voltage. Do not load externally.

16

Positive Supply Voltage, 3.0 to 5.5 V

Table 1. Pin Descriptions

Pin Number

Pin Name

Description