ADP1715ARMZ-R7 datasheet(33/75 Pages) AD

33 / 75 page

ADSP-BF506F EZ-KIT Lite Evaluation System Manual

1-13

Using ADSP-BF506F EZ-KIT Lite

using an oscilloscope, and the value of the resistor can be measured using a

precision multi-meter. Once the voltage and resistance are measured, the

current can be calculated by dividing the voltage by the resistance. For the

highest accuracy, a differential probe should be used for measuring the

voltage across the resistor.

Example Programs

Example programs are provided with the ADSP-BF506F EZ-KIT Lite to

demonstrate various capabilities of the product. The programs are

installed with the ADSP-BF506F special kit installation, on top of the

VisualDSP++ 5.0 base kit or any VisualDSP++ and can be found in the

<install_path>\Blackfin\Examples\ADSP-BF506F EZ-KIT Lite

direc-

tory. Refer to a readme file provided with each example for more

information.

Background Telemetry Channel

The USB debug agent supports the background telemetry channel (BTC),

which facilitates data exchange between VisualDSP++ and the processor

without interrupting processor execution.

The BTC allows you to view a variable as it is updated or changed, all

while the processor continues to execute. For increased performance of the

BTC, including faster reading and writing, please check our latest line of

processor emulators at:

http://www.analog.com/en/embedded-processing-dsp/black-

fin/USB-EMULATOR/products/product.html

. For more information about

the BTC, see the online Help.

ADP1715ARMZ-R7 数据表(PDF) 33 Page - Analog Devices